CM602all_EJM8AESM_Service Manual.pdf - 第743页

9 Fit the joints onto the new cylinders. Wrench 8 mm Spacer Joint 10 Put the cylinders on the nozzle holder section. 11 Fix the cylinders onto the nozzle holder section. Allen key 2.5 mm Screw M3 4 pcs. 12 Put the cylind…

100%1 / 1093
Be careful not to let the screws and
the spacers fall.
Remove the cylinder holding screws.
Remove the cylinders.
Remarks
5
Remove the cylinder air tubes.
8
7
6
Remove the cylinder holding block.
Optional Accessory Parts Replacement
Allen key 2.5 mm
Screw M3 4 pcs.
Allen key 3 mm
Screw M4 10 pcs.
Nozzle Changer Unit (3-nozzle type)
Item
EJM8A-E-SMA060201-A01-00
Page　6-2-1-3
9
Fit the joints onto the new cylinders.
Wrench 8 mm
Spacer
Joint
10
Put the cylinders on the nozzle holder
section.
11
Fix the cylinders onto the nozzle holder
section.
Allen key 2.5 mm
Screw M3 4 pcs.
12
Put the cylinder holding block back on.
Allen key 3 mm
Screw M4 10 pcs.
Optional Accessory Parts Replacement Nozzle Changer Unit (3-nozzle type)
Item Remarks
EJM8A-E-SMA060201-A01-00
Page　6-2-1-4
15
Switch on the main power and air supply.
13
16
Adjust the stroke with the cylinder
adjuster.
Calipers
When shutter open:
A: 15.75±0.25mm
B=0±0.25mm
When shutter closed:
A=0±0.25mm
B=15.75±0.25mm
14
Connect the connectors to the sensor.
Item Remarks
Optional Accessory Parts Replacement Nozzle Changer Unit (3-nozzle type)
Connect the air tubes to the cylinders.
1
2
B
A
EJM8A-E-SMA060201-A01-00
Page　6-2-1-5