CM602all_EJM8AESM_Service Manual.pdf - 第950页
Tray Shuttle Tray 10 11 12 MR-J2-20A-N26 Allen key 4 mm Screw M5 2 pcs. Connect all driver connectors. Install the box. Item Remarks Phillips precision screwdriver Connector screws Install the driver. Connect the relay c…
Tray Shuttle Tray
Cut off the cable ties on the right side.
Pull out the box. Remove the driver connectors.
6
7
8
Be careful not to let the
cables be caught.
Phillips precision
screwdriver
Connector screws
Remove the connectors.
Nipper
Cut off the front cable ties.
Remove the box holding screws.
Allen key 4 mm
Screw M5 2 pcs.
Open the front cover.
Phillips screwdriver #2
Item Remarks
5
EJM8A-E-SMA070112-A01-00
Page 7-1-12-3
Tray Shuttle Tray
10
11
12
MR-J2-20A-N26
Allen key 4 mm
Screw M5 2 pcs.
Connect all driver connectors.
Install the box.
Item Remarks
Phillips precision
screwdriver
Connector screws
Install the driver. Connect the relay connectors.
9
Phillips precision
screwdriver
Connector screws
Remove the relay connectors and the
driver holding screws.
Be careful not to let the
cable be caught.
Phillips precision
screwdriver
Connector screws
Fix the box and the cable in place.
EJM8A-E-SMA070112-A01-00
Page 7-1-12-4
14
Close the front cover. Fix it in place.
16
Phillips precision
screwdriver
Connector screws
Connect all connectors to the front board.
15
Connect the connectors to the right side of the box.
Phillips screwdriver #2
Item Remarks
13
Nipper
Connect the cable connectors on the right side.
Secure the cable ties.
Tray Shuttle Tray
EJM8A-E-SMA070112-A01-00
Page 7-1-12-5