CM602all_EJM8AESM_Service Manual.pdf - 第598页
Machinery Part Replacement Remarks Cutting Unit Item Put the side bracket back on. Allen key 3 mm Screw M4 4 pcs. Allen key 2.5 mm Wrench 5.5 mm Screw M3 3 pcs. Nut 5.5 mm 1 pc. Spacer 2 pcs. Precisely position the senso…
Machinery Part Replacement
Remarks
Cutting Unit
Item
Place the dial gauge mounting plate onto the head.
Dial gauge mounting plate
Allen key 3 mm
Adjust the cutter unit to parallel.
Specification:
Parallelism:
within 0.1 mm
Dial gauge
Magnetic stand
Secure the tightness of the cutter unit
Be very careful not to let the unit fall.
holding bolts.
Allen key 5 mm
Screw M6-30 2 pcs.
Screw M6-45 1 pc.
Remove the dial gauge mounting plate from the head.
Dial gauge mounting plate
Allen key 3 mm
17
18
19
20
Fulcrum (Cutter positioning jig)
EJM8A-E-SMA050904-A01-00
Page 5-9-4-6
Machinery Part Replacement
Remarks
Cutting Unit
Item
Put the side bracket back on.
Allen key 3 mm
Screw M4 4 pcs.
Allen key 2.5 mm
Wrench 5.5 mm
Screw M3 3 pcs.
Nut 5.5 mm 1 pc.
Spacer 2 pcs.
Precisely position the sensor and dog.
Connect the grease tube.
Put the feeder gang exchange cart sensor back on.
22
23
21
24
17mm
EJM8A-E-SMA050904-A01-00
Page 5-9-4-7
Machinery Part Replacement
Remarks
Cutting Unit
Item
Connect the cylinder tubes.
Air tube φ8 4 pcs.
Secure the air tubes with cable ties.
Nipper
Cable tie 150 6 pcs.
Put the lower cutter cover back on.
Allen key 3 mm
Screw M4x10mm 5 pcs.
Put the upper cutter cover back on.
Allen key 3 mm
Screw M4x8mm 5 pcs.
25
26
27
28
EJM8A-E-SMA050904-A01-00
Page 5-9-4-8