CM602all_EJM8AESM_Service Manual.pdf - 第230页
Maintenance Adjustment Light Transfer-Head Assembly (8 nozzles) 16 15 Press [OK]. ITEM 14 Pickup and recognition are suspended and test run starts. Warm up the machine for approximately 10 minutes and press [Cycle stop] …
E112320C
10
9
ITEM
Specify pickup position offset.
11
12
There is only one tape
feeder; it is not necessary
to select the feeder.
See "Operating Manual
Section 4-6. Pick-up
Position Learning
Teaching."
Nozzle 110 x 16 pcs.
Teach "pickup position learning."
Place the light box. Be careful of tape position.
REMARKS
Light Transfer-Head Assembly (8 nozzles)Maintenance Adjustment
Fit Nozzles 110 onto both stages: Front and Rear.
Stopper
Light Box
Position the light box close to the stopper.
Middle position
Do not place
tape here!
Fixed tape
EJM8A-E-SMA040207-A01-00
Page 4-2-7-5
Maintenance Adjustment Light Transfer-Head Assembly (8 nozzles)
16
15
Press [OK].
ITEM
14
Pickup and recognition are
suspended and test run
starts.
Warm up the machine for
approximately 10 minutes
and press [Cycle stop] to
stop the machine.
Press the "Unlock" and the "Start"
Test Run screen
keys simultaneously.
Press [Warmup operation]. Press [ESC].
Press [Yes].
REMARKS
13
To warm up the machine,
Select the desired stage.
press [Production].
EJM8A-E-SMA040207-A01-00
Page 4-2-7-6
治具基板挿入？ PTﾃﾞｰﾀ無し
19
Press [Mount pos teach].
17
Press the "Return" switch.
20
18
Maintenance Adjustment
Select the desired stage.
ITEM
Light Transfer-Head Assembly (8 nozzles)
Press [ESC].
Press [Production].
Press [Yes]. Press [OK].
REMARKS
Press [Yes].
EJM8A-E-SMA040207-A01-00
Page 4-2-7-7