CM602all_EJM8AESM_Service Manual.pdf - 第858页
Remarks Item Option Part and Accessory Replacemen t PCB-Warp-Sensor Unit Move the head onto the j i g . Height measuring jig FM-1964 Fit the adjusting jig. Fit the PCB-warp sensor in the V- shaped section of the sensor-i…
Remarks
Item
Option Part and Accessory Replacemen
t
PCB-Warp-Sensor Unit
Press [Height unit].
18
The conveyor width is adjusted
automatically.
Press the "Return" key to return to the
main menu.
19
Turn off the power and air supply.
20
Put the jig on the conveyor.
21
Put the jig FM-1964 here. Board stopper
4
5
1
2
EJM8A-E-SMA060503-A01-00
Page 6-5-3-7
Remarks
Item
Option Part and Accessory Replacemen
t
PCB-Warp-Sensor Unit
Move the head onto the
j
i
g
.
Height measuring jig
FM-1964
Fit the adjusting jig.
Fit the PCB-warp sensor in the V-
shaped section of the sensor-installing-
adjusting jig FM-1963 shown with the
dotted line at left.
With the sensor making a close contact
with the jig, slide the height-measuring
jig FM-1964 under the jig from the right.
Sensor installing jig
FM-1963
Height measuring jig
FM-1964
Adjust sensor installation.
Wrench M4
M4 x 14L (2 pcs.)
Remove the sensor-installing jig.
22
23
24
25
Move the head.
Height measuring jig FM-1964
Loosen the two M4x14L bolts. Fit the
sensor in the V-shaped section of the
sensor-installation-adjusting jig FM-1963.
With the sensor making a close contact
with the jig, tighten the two M4 x 14L
bolts.
Remove the installation-adjusting jig
FM-1963 and the height-measuring
j
ig FM-1964.
PCB warp sensor
Sensor-installation-adjusting jig FM-1963
EJM8A-E-SMA060503-A01-00
Page 6-5-3-8
Remarks
Item
Option Part and Accessory Replacemen
t
PCB-Warp-Sensor Unit
Put the feeder cover back on.
Allen key 3 mm
Screw M4 4 pcs.
Turn on the power and air supply.
PCB-warp-sensor adjustment
Teaching
Adjusting the amplifier 0 reference
position (0-volt adjustment)
Adjusting the slant (span) of amplifier
(+2-volt adjustment)
XY offset teaching
See Section 6-5-5
27
26
28
1
2
EJM8A-E-SMA060503-A01-00
Page 6-5-3-9