CM602all_EJM8AESM_Service Manual.pdf - 第167页
Weigh t o f Part 20 min. min. Removal Disassembly A ssembl y Adjustment Teaching Total Time 20 min. 20 min . 60 Kgs . Main Body Beam Maintenance Adjustment Phillips screwdriver #2 Allen key 4 mm Wrench 7 mm 4-1-9 Lead Ch…
Maintenance Adjustment Main Body Beam
Remarks
Item
Teach "Chip recognition camera - Theta-axis origin offset."
Section 4-2-4
"Head angle origin" screen
画面305000
Specifications:
within +/- 5°
Put back the feeder cover and the chute.
Close the cover.
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
Screw M4-10 3 pcs.
Thick washer 3 pcs.
ﾟ
11
10
9
EJM8A-E-SMA040108-A01-00
Page 4-1-8-4
Weigh
t
o
f
Part
20 min. min.
Removal
Disassembly
A
ssembl
y
Adjustment
Teaching
Total Time
20 min.20
min
.
60
Kgs
.
Main Body BeamMaintenance Adjustment
Phillips screwdriver #2
Allen key 4 mm
Wrench 7 mm
4-1-9 Lead Checker Height Adjustment
・Tools
This section describes the procedures for adjusting the height of the lead checker.
FM-1137
Laser Recognition Jig
・Jig
Caution
Danger
Warning
EJM8A-E-SMA040109-A01-00
Page 4-1-9-1
If the value is out of the offset
range, follow Steps 5 to 12.
Maintenance Adjustment
Select [Lead checker] from the
Remove the feeder cover.
Remove the cutter chute cover.
3
1
Main Body Beam
Remarks
For details, refer to
"Section 4-3-11 Lead
Checker"
Tools and Specifications
Perform "Z teach" only.
Tools and Specifications
Phillips screwdriver #2
Screw M4 2 pcs.
Offset range:
Z: -1.0 mm to +1.0 mm
Allen key 3 mm
Screw M4 3 pcs.
Tools and Specifications
Tools and Specifications
2
"Machine parameter teach" screen.
4
Item
Check the value for "Z teach."
EJM8A-E-SMA040109-A01-00
Page 4-1-9-2