CM602all_EJM8AESM_Service Manual.pdf - 第937页
Tray Shuttle Tray Tools Jigs Removal/Disassembly 7-1-10 Extension-Axis Stroke Adjustment This section describes the procedures for adjusting the stroke of the extension-axis. Jig: FM-0982 Min. Part Weight Assembly/Adjust…
Item Remarks
Tray Shuttle Tray
25
carry out machine parameter teaching.
See Section 7-1-2. "Shuttle
Tray Pickup Position
Teaching."
Once the mechanical adjustment is complete,
EJM8A-E-SMA070109-A01-00
Page 7-1-9-8
Tray Shuttle Tray
Tools
Jigs
Removal/Disassembly
7-1-10 Extension-Axis Stroke Adjustment
This section describes the procedures for adjusting the stroke of the extension-axis.
Jig: FM-0982
Min.
Part Weight
Assembly/Adjustment
Teaching
Total
Min.
Phillips screwdriver #2
Allen key 2.5 mm
Allen key 4 mm
kgs.
0
Min. Min.
Dange
r
Warning
Caution
EJM8A-E-SMA070110-A01-00
Page 7-1-10-1
After loosening the power locks,
hit them lightly to remove them.
Tray Shuttle Tray
Move the extension-axis forwards by 436.5 st.
4
RemarksItem
Open the side cover
Phillips screwdriver #2
Screw M4 8 pcs.
2
1
Allen key 4 mm
Screw M5 4 pcs.
Return the extension-axis (TL) to the origin.
Loosen the power locks of the
motor section
.
3
436.5
EJM8A-E-SMA070110-A01-00
Page 7-1-10-2