CM602all_EJM8AESM_Service Manual.pdf - 第811页

Option Part and Accessory Replacement Component-Thickness-Measuring Unit Remark Turn off (O) the servo switch. Open the safety cover. Close the safety cover. Turn on (I) the servo switch. • Start teaching. * Once teachin…

100%1 / 1093
Option Part and Accessory Replacement
Component-Thickness-Measuring Unit
Remark
Press [Z-axis origin offset].
Select the table to be taught.
When teaching the Z-axis only:
* Press [ChipThickness] so that it will not
be selected.
When teaching chip thickness only:
* Press [Z axis] so that it will not be
selected.
Press [UNLOCK] on the operation panel and [Jig setting] simultaneously.
Item
6
4
5
Press [UNLOCK] on the operation panel and [Return to origin] simultaneously.
7
4
5
6
7
EJM8A-E-SMA060403-A01-00
Page　6-4-3-3
Option Part and Accessory Replacement
Component-Thickness-Measuring Unit
Remark
Turn off (O) the servo switch.
Open the safety cover.
Close the safety cover.
Turn on (I) the servo switch.
• Start teaching.
* Once teaching is finished, check a
message "Measurement is finished." is
displayed and proceed to the next
procedure.
9
8
Item
Fit Nozzles 130S on all the nozzle positions.
Press [UNLOCK] on the operation panel and [Height orig tch] simultanously.
10
11
11
EJM8A-E-SMA060403-A01-00
Page　6-4-3-4
Option Part and Accessory Replacement
Component-Thickness-Measuring Unit
Remark
• The head moves to the removal
position.
Turn off (O) the servo switch.
Open the safety cover.
Remove the nozzles.
Close the safety cover.
Turn on (I) the servo switch. * Repeat Steps 5 to 14 for
the other tables.
Press the function key .
Item
14
15
13
Press [UNLOCK] on the operation panel and [Jig remove] simultaneously.
12
12
15
EJM8A-E-SMA060403-A01-00
Page　6-4-3-5