CM602all_EJM8AESM_Service Manual.pdf - 第910页
30 80 50 Lift-axis Motor Replacement Phillips screwdriver #2 Allen key 3 mm Allen key 5 mm Wrench 14 mm Dial gauge Magnetic stand Magnetic stand holding iron plate This section describes the procedures for replacing the …
Item Remarks
17
Phillips screwdriver #2
Screw M4 4 pcs.
90578
Put the front and the side covers back on.
18
Power up the machine.
Tray Shuttle Tray
EJM8A-E-SMA070105-A01-00
Page 7-1-5-6
30 8050
Lift-axis Motor Replacement
Phillips screwdriver #2
Allen key 3 mm
Allen key 5 mm
Wrench 14 mm
Dial gauge
Magnetic stand
Magnetic stand holding iron
plate
This section describes the procedures for replacing the lift-axis motor.
Alignment jig
FM-0558: Palette jig
Tray Shuttle Tray
Min. Min. Min. kgs.
7-1-6
Tools
Jigs
Removal/Disassembly Assembly/Adjustment
Teaching
Total Part Weight
Min.
Dange
r
Caution
Warning
EJM8A-E-SMA070106-A01-00
Page 7-1-6-1
When the ball screw is not positioned
in the origin, it cannot be removed, so
skip this step.
Phillips screwdriver #2
Screw M4 12 pcs.
Allen key 3 mm
Screw M4 4 pcs.
Remove the ball screw cover.
Remraks
Switch off the power.
1
Item
Remove the top cover.
2
3
4
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
M4×10L 8 pcs.
Tray Shuttle Tray
Open the cover.
EJM8A-E-SMA070106-A01-00
Page 7-1-6-2