CM602all_EJM8AESM_Service Manual.pdf - 第681页
Maintenance Part Replacement 12-Nozzle Head Teaching Remarks Press [W axis origin offset]. Select the desired stage. Press [Unlock] and [Return to origin] simultaneously. The width adjusting axis returns to the origin. P…
Maintenance Part Replacement 12-Nozzle Head Teaching
Tools
Ruler 500 mm
Jig
None
5-11-5 Conveyor-Width-Adjusting Axis Origin Offset
Remove the support pins beforehand.
This section describes the procedures for determining the offset for the origin of the conveyor-width adjusting axis.
Caution Dange
r
Warning
EJM8A-E-SMA051105-A01-00
Page 5-11-5-1
Maintenance Part Replacement 12-Nozzle Head Teaching
Remarks
Press [W axis origin offset].
Select the desired stage.
Press [Unlock] and [Return to origin] simultaneously.
The width adjusting axis returns to the
origin.
Press [Unlock] and one of the arrow keys - [
↑] or [↓] - simultaneously.
Moving the width adjusting axis and
measuring the width of the conveyor with
a ruler, adjust the width to 460.5 mm.
Each time the [Key rsps] key is pressed,
the amount by which the axis moves is
changed from 0.01 mm to 0.1 mm to 1
mm.
Specifications:
460.5 mm + 0mm to
0.2mm
(460.5mm to 460.7mm)
1
Item
2
3
4
EJM8A-E-SMA051105-A01-00
Page 5-11-5-2
Maintenance Part Replacement 12-Nozzle Head Teaching
Remarks
Item
Once the width has been adjusted, press [Offset set].
The preset offset is changed to the new
one.
Press the [Return] key.
Max: 460 mm+/-0.2mm
Min: 50 mm+/-0.2mm
The offset is entered into the screen below:
Offset range:
0.00mm to +5.00mm
7
6
5
EJM8A-E-SMA051105-A01-00
Page 5-11-5-3