CM602all_EJM8AESM_Service Manual.pdf - 第192页

Maintenance Adjustment Main Body Beam Item Remarks 15 Phillips screwdriver #2 Allen key 3 mm Screw M4 2 pcs. M4x10 3 pcs. Put the feeder cover and the chute back on. 14 Remove the iron plate from the head. Allen key 3 mm…

100%1 / 1093
Points (1) to (12).
12
Re-check the levelness.
Employing (8) as reference, measure
All sections except board clamp
section:
Levelness: ±0.1㎜
Board clamp section:
Levelness:
within ±0.02 mm
Reference height:
169.35±0.1㎜
Dial gauge, Magnetic stand
11
Tighten the eccentric pin nut.
Box wrench 7 mm
10
Tighten the conveyor holding bolts.
Allen key 4 mm
Screw M5 4 pcs.
Item Remarks
9
Phillips screwdriver #2
Eccentric pin
To adjust the height, rotate the eccentric pin.
Maintenance Adjustment Main Body Beam
Fixed conveyors Movable conveyors
11
4
2
8
9
53
10 12
1
7
6
To raise or lower the
conveyors, rotate the
ti i
169.35+/-0.1mm
Movable conveyor
(
Left and Ri
g
ht: s
y
mmetric
)
Fixed conveyors
Movable conveyor
(Left and Right: symmetric)
EJM8A-E-SMA040114-A01-00
Page　4-1-14-4
Maintenance Adjustment Main Body Beam
Item Remarks
15
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
M4x10 3 pcs.
Put the feeder cover and the chute back on.
14
Remove the iron plate from the head.
Allen key 3 mm
Screw M4 1 pc.
13
Put the transfer conveyor belt back on.
High-speed
head
Multi-purpose
head
EJM8A-E-SMA040114-A01-00
Page　4-1-14-5
Be careful not to deform the shadin
g
p
lates.
A
deformed shadin
g
p
late ma
y
cause a reco
g
nition error.
Removal/Disassembly
Part Weight
kg
Phillips screwdriver #2
Allen key 3 mm
Allen key 4 mm
Cloth
Ruler 150 mm
Total Time
Min.
2
Min.
-
Min.
2
Min.
Maintenance Adjustment Main Body Beam
Assembly/Adjustment
Teaching
• Jigs
4-1-15 Chip Camera Cover Glass Cleaning (Inside)
• This section describes the procedures for cleaning the chip camera cover glass.
• Tools
Caution
Dange
r
Warning
EJM8A-E-SMA040115-A01-00
Page　4-1-15-1