CM602all_EJM8AESM_Service Manual.pdf - 第746页
Optional Accessory Parts Replacement This section describes the procedures for replacing the solenoid valve (for multi-purpose machines). ・ Tools Phillips screwdriver #2 Allen key 2.5 mm ・ Jig None Nozzle Changer Unit (3…
Item Remarks
Optional Accessory Parts Replacement Nozzle Changer Unit (3-nozzle type)
Phillips screwdriver #2
Screw M4 2 pcs.
17
Put the right side cover back on.
Phillips screwdriver #2
Screw M4 4 pcs.
18
Put the feeder cover back on.
EJM8A-E-SMA060201-A01-00
Page 6-2-1-6
Optional Accessory Parts Replacement
This section describes the procedures for replacing the solenoid valve (for multi-purpose machines).
・Tools
Phillips screwdriver #2
Allen key 2.5 mm
・Jig
None
Nozzle Changer Unit (3-nozzle type)
6-2-2 Solenoid Valve Replacement (Multi-Purpose Machines)
Assembly
Adjustment
5min.
Teaching
min.
Total Time Weight of
Part
Removal
Disassembly
5min.
10min. kgs
Caution
Dange
r
Warning
EJM8A-E-SMA060202-A01-00
Page 6-2-2-1
Optional Accessory Parts Replacement
Remarks
Switch off the main power and air supply.
Remove the feeder cover.
Phillips screwdriver #2
Screw M4 2 pcs.
Remove the connectors and the air tubes from the valve.
5-000036
Before removing, put marks on the
connectors and the air tubes so as not to
confuse 'Open' and 'Close' when putting
them back on.
Remove the valve holding screws.
Replace the valve. Allen key 2.5 mm
Screw M3 2 pcs.
3
4
1
Item
2
Nozzle Changer Unit (3-nozzle type)
1
2
EJM8A-E-SMA060202-A01-00
Page 6-2-2-2