CM602all_EJM8AESM_Service Manual.pdf - 第984页

Connect the Si g nal Cable 2. Philli p s screwdriver #1 Button head screw M3 2 pcs. Put the Y-motor cover back on. Insert it as shown below: Secure the connectors with the screws. Remove the screws from the non-used conn…

100%1 / 1093
Connect the signal cable to the CPU.
Connect it to NF0FCX CN13.
Fix the cover in place.
Tray
Phillips screwdriver #2
Allen key 3 mm
M4 button head screw
4 pcs.
M4 screw 6 pcs.
31
Replace the cover.
Install the emergency stop button.
32
Item Remarks
Shuttle Tray
29
30
Connect the air tube.
ＣＰＵ　ＢＯＸ
EJM8A-E-SMA070117-A01-00 Page　7-1-17-9
Connect the Si
g
nal Cable 2.
Philli
p
s screwdriver #1
Button head screw M3
2 pcs.
Put the Y-motor cover back on.
Insert it as shown below:
Secure the connectors with the screws.
Remove the screws from the non-used
connector cover, and hold the connector
with them.
Be careful of the direction when
connecting it.
The side with the maker name on should
be positioned top as shown at left.
34
36
35
Close the duct covers.
Remarks
33
Tray
Item
Shuttle Tray
A
POWER
UNIT#1
POWER
UNIT#2
CPU BOX
A
BF
BR
ＵＰ
EJM8A-E-SMA070117-A01-00 Page　7-1-17-10
Put the machine side covers back on.
Philli
p
s screwdriver #2
stages on the rear side.
Put the side covers back on all the
Remarks
Allen key 4 mm
M5 x 12 mm 4 pcs x 4
Thick washer 4 pcs x 4
Put all lower chutes back on.
Phillips screwdriver #2
Button head screw 6mm
4 pcs.
(3 pcs on AF)
38
40
39
37
Tray Shuttle Tray
Item
Put the lower box covers back on.
Left chute
installing section
Right chute
installing
section
EJM8A-E-SMA070117-A01-00 Page　7-1-17-11