CM602all_EJM8AESM_Service Manual.pdf - 第439页
Machinery Part Replacement Remarks Item L ight Transfer-Head Assembly (8-nozzle type ) Fit the spring and then the nozzle holder. 5 EJM8A-E-SMA050308-A01-00 Page 5-3-8-3
Machinery Part Replacement
Remarks
Remove the nozzle holder.
Remove the spring.
Apply grease to the holder. Apply a small amount of grease. BARRIERTA IEL
Fit the spring.
Replace the hook.
Be careful with the orientation (upper and
lower sides) of the hook.
Item
2
3
4
1
L
ight Transfer-Head Assembly (8-nozzle type
)
Apply grease here.
EJM8A-E-SMA050308-A01-00
Page 5-3-8-2
Machinery Part Replacement
Remarks
Item
L
ight Transfer-Head Assembly (8-nozzle type
)
Fit the spring and then the nozzle holder.
5
EJM8A-E-SMA050308-A01-00
Page 5-3-8-3
Machinery Part Replacement
This section describes the procedures for replacing the cooling fan.
・Tools
Phillips screwdriver #1
Phillips screwdriver #2
Allen key 2.5 mm
BARRIERTA IEL
(Grease)
・Jig
None
5-3-9 Cooling Fan Replacement
Light Transfer-Head Assembly (8-nozzle type)
Caution
Dange
r
Warning
Assembly
Adjustment
8min.
Teaching
min.
Total Time Weight of
Part
Removal
Disassembly
7min.
15min.
kgs
EJM8A-E-SMA050309-A01-00
Page 5-3-9-1