CM602all_EJM8AESM_Service Manual.pdf - 第961页
Set the machine parameter offset to "0." Measure the distance from the dog to the mechanical stopper. 4 3 Remarks Ruler Gap from dog to stopper: 9.5mm 2 1 Item Remove the top cover. Carry out "Return to or…
This section describes the procedures for adjusting the stroke of the transfer unit.
7-1-14 Transfer Unit Stroke Adjustment
Phillips screwdriver #2
Allen key 3 mm
Ruler 150 mm
Ruler 300 mm
None
min. min.
kgs.
35
min.min.
1520
Shuttle TrayTray
Tools
Jigs
Removal/Disassembly Assembly/Adjustment
Teaching
Total Part Weight
Dange
r
Warning
Caution
EJM8A-E-SMA070114-A01-00
Page 7-1-14-1
Set the machine parameter offset to "0."
Measure the distance from the dog
to the mechanical stopper.
4
3
Remarks
Ruler
Gap from dog to stopper:
9.5mm
2
1
Item
Remove the top cover.
Carry out "Return to origin."
Phillips screwdriver #2
Truss M4 4 pcs.
Tray Shuttle Tray
5510(22)
3
558
550 cm
－O/R
StrokeOrigin
＋O/R
Mechanical
stopper
Dog
＋soft limit －soft limit
EJM8A-E-SMA070114-A01-00
Page 7-1-14-2
7
bolts positioned at the rear side of the belt clamp section.
If it is necessary to adjust the distance more than 3 mm,
loosen the bolts below and move the belt.
Carry out "Return to origin." Check the distance.
5
8
Allen key 2.5 mm
Screw M3 2 pcs.
Adjustable distance:
+/- 3 mm
Remarks
Allen key 2.5 mm
Screw M3 2 pcs.
Phillips screwdriver #2
Truss M4 4 pcs.
Put the top cover back on.
To adjust the distance, loosen the
Tray
Item
6
Shuttle Tray
22
B
A=550 cm
(587)
C
D
E
(67)
(8.5)
(46.5)
EJM8A-E-SMA070114-A01-00
Page 7-1-14-3