CM602all_EJM8AESM_Service Manual.pdf - 第749页

・ Tools ・ Jigs 6-2-3 Nozzle Changer Replacement (Multi-Purpose Machines) Nozzle Changer Unit (3-nozzle type) Optional Part and Accessory Replacement • T his section describes the procedures for replacing the multi-purpos…

100%1 / 1093
Optional Accessory Parts Replacement
Remarks
Item
Nozzle Changer Unit (3-nozzle type)
Lock the valve.
5-000017
Allen key 2.5 mm
Screw M3 2 pcs.
Connect the air tubes and the connectors.
5-000036
Put the feeder cover back on.
Phillips screwdriver #2
Screw M4 2 pcs.
Switch on the main power and air supply.
5
6
7
8
1
2
EJM8A-E-SMA060202-A01-00
Page　6-2-2-3
・Tools
・Jigs
6-2-3　　　　　 Nozzle Changer Replacement (Multi-Purpose Machines)
Nozzle Changer Unit (3-nozzle type)Optional Part and Accessory Replacement
• This section describes the procedures for replacing the multi-purpose nozzle changer.
Phillips screwdriver #2
Allen key 3 mm
Allen key 4 mm
Iron plate
Dial gauge
Magnetic stand
FM-0727
Position teaching jig
kgs.
10
Min.
Removal/Disassembly Assembly/Adjustment
Teaching
Total Part Weight
10
Min.
20
Min.Min.
Danger
Caution
Warning
EJM8A-E-SMA060203-A01-00
Page 6-2-3-1
2
1
Remove the feeder cover and the chute.
Switch OFF the main power and
air supply.
Optional Part and Accessory Replacement Nozzle Changer Unit (3-nozzle type)
Tool/Spec./Installation
Tool/Spec./Installation
Item Remark
4
3
Disconnect the nozzle changer
connectors.
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
Screw M4 3 pcs.
Phillips screwdriver #2
Screw M4 4 pcs.
J1■35=Open,
J1■36=Closed
　■=
　AF　-　2
　AR　-　4
　BF　-　B
　BR　-　D
Tool/Spec./Installation
Tool/Spec./Installation
Remove the right side cover.
EJM8A-E-SMA060203-A01-00
Page 6-2-3-2