CM602all_EJM8AESM_Service Manual.pdf - 第149页
Maintenance Adjustment Main Body Beam Remarks Item Loosen the screws. Make the rail parallel. Place the dial gauge at the end of the reference plate. Moving it along the plates, level them with the bolts. Allen key 3 mm …
Maintenance Adjustment Main Body Beam
Remarks
Remove the feeder cover and the chute.
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
Screw M4x10mm 3 pcs.
Thick washer 3 pcs.
Remove the fixed Z clamp plate.
Allen key 3 mm
M4-10 8 pcs.
Place the iron plate on the head.
Iron plate
Allen key 3 mm
M4-15 1 pc.
Check the parallelism of the fixed clamp rail.
Specifications:
within ±0.02㎜
Dial gauge
Magnetic stand
3
4
1
Item
2
EJM8A-E-SMA040104-A01-00
Page 4-1-4-2
Maintenance Adjustment Main Body Beam
Remarks
Item
Loosen the screws. Make the rail parallel.
Place the dial gauge at the end of the
reference plate.
Moving it along the plates, level them
with the bolts.
Allen key 3 mm
Specifications:
within ±0.02㎜
Secure the tightness of the screws.
Confirm the parallelism. Specifications:
within ±0.02㎜
Dial gauge
Magnetic stand
Put the fixed Z clamp plate back on.
Allen key 3 mm
M4-10 8 pcs.
Remove the iron plate from the head assembly.
Allen key 3 mm
M4-15 1 pc.
8
5
6
7
EJM8A-E-SMA040104-A01-00
Page 4-1-4-3
Maintenance Adjustment Main Body Beam
Remarks
Item
Put the feeder cover and the chute back
o
Tighten the two screws at both edges of
the cover. Close the cover. Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
Screw M4x10mm 3 pcs.
Thick washer 3 pcs.
9
EJM8A-E-SMA040104-A01-00
Page 4-1-4-4