CM602all_EJM8AESM_Service Manual.pdf - 第929页
Teaching Tools Jigs Min. Min. 25 Connector jig Phillips screwdriver #2 Allen key 3 mm Allen key 4 mm Ruler 150 mm Ruler 300 mm kgs. 75 Min. Min. 35 This section describes the procedures for replacing the shuttle head mot…
Item Remarks
Shuttle TrayTray
Allen key 3 mm
Phillips screwdriver #2
M4×8L 3 pcs.
M4×10L 2 pcs.
M5×15L Truss 2 pcs.
21
Put the top cover back on.
Allen key 3 mm
Phillips screwdriver #2
M4×8L 8 pcs.
M4×10L Truss 2 pcs.
See Section 7-1-2. "Shuttle
Tray Pickup Position
Teaching."
23
Close the maintenance door.
Allen key 3 mm
M4 x 10L 1 pc.
Connect the door switch connector.
24
22
Put the cover back on.
Once the mechanical adjustment is complete,
carry out machine parameter teaching.
Door switch of
Delivery position
EJM8A-E-SMA070108-A01-00
Page 7-1-8-7
Teaching
Tools
Jigs
Min. Min.
25
Connector jig
Phillips screwdriver #2
Allen key 3 mm
Allen key 4 mm
Ruler 150 mm
Ruler 300 mm
kgs.
75
Min.Min.
35
This section describes the procedures for replacing the shuttle head motor.
Total Part Weight
Assembly/AdjustmentRemoval/Disassembly
15
7-1-9 Shuttle Head Motor Replacement
Shuttle TrayTray
Dange
r
Warning
Caution
EJM8A-E-SMA070109-A01-00
Page 7-1-9-1
Item
Open the cover of the delivery position. Open the maintenance door.
Remove the door switch connector.
1
Switch off the power.
Remarks
Remove the top cover.
Allen key 3 mm
Phillips screwdriver #2
M4×8L 8 pcs.
M4×10L Truss 2 pcs.
Remove the cover holding screws.
3
4
Tray Shuttle Tray
Allen key 3 mm
M4 x 10L 1 pc.
2
Allen key 3 mm
Phillips screwdriver #2
M4×8L 3 pcs.
M4×10L 2 pcs.
M5×15L Truss 2 pcs.
Door switch of
Delivery position
EJM8A-E-SMA070109-A01-00
Page 7-1-9-2