CM602all_EJM8AESM_Service Manual.pdf - 第909页
Item Remarks 17 Phillips screwdriver #2 Screw M4 4 pcs. 90578 Put the front and the side covers back on. 18 Power up the machine. Tray Shuttle Tray EJM8A-E-SMA070105-A01-00 Page 7-1-5-6
Connect the cable connectors on the right side.
Tray Shuttle Tray
Phillips screwdriver #2
Item Remarks
13
Nipper
Secure the cable ties.
Close the front cover. Fix it in place.
16
Phillips precision
screwdriver
Connector screws
14
Connect the connectors to the right side of the box.
Connect all connectors to the front board.
15
EJM8A-E-SMA070105-A01-00
Page 7-1-5-5
Item Remarks
17
Phillips screwdriver #2
Screw M4 4 pcs.
90578
Put the front and the side covers back on.
18
Power up the machine.
Tray Shuttle Tray
EJM8A-E-SMA070105-A01-00
Page 7-1-5-6
30 8050
Lift-axis Motor Replacement
Phillips screwdriver #2
Allen key 3 mm
Allen key 5 mm
Wrench 14 mm
Dial gauge
Magnetic stand
Magnetic stand holding iron
plate
This section describes the procedures for replacing the lift-axis motor.
Alignment jig
FM-0558: Palette jig
Tray Shuttle Tray
Min. Min. Min. kgs.
7-1-6
Tools
Jigs
Removal/Disassembly Assembly/Adjustment
Teaching
Total Part Weight
Min.
Dange
r
Caution
Warning
EJM8A-E-SMA070106-A01-00
Page 7-1-6-1