CM602all_EJM8AESM_Service Manual.pdf - 第846页
Remarks Turn off the power and air supply. Remove the feeder cover. Allen key 3 mm Screw M4 4 pcs. Remove the head upper cover. Phillips screwdriver #2 Truss screw M4 4 pcs. Option Part and Accessory Replacement Item 1 2…
This section describes the procedures for replacing the PCB-warp-sensor amplifier (12-nozzle head spec.)
• Tools
Phillips screwdriver #1
Phillips screwdriver #2
Allen key 5 mm
Pipe
Nipper
Option Part and Accessory Replacement
PCB-Warp-Sensor Unit
6-5-2 PCB-Warp-Sensor-Amplifier Replacement (12-Nozzle-Head Spec.)
• Jigs
Dange
r
Warning
Caution
EJM8A-E-SMA060502-A01-01
Page 6-5-2-1
Remarks
Turn off the power and air supply.
Remove the feeder cover.
Allen key 3 mm
Screw M4 4 pcs.
Remove the head upper cover.
Phillips screwdriver #2
Truss screw M4 4 pcs.
Option Part and Accessory Replacement
Item
1
2
3
4
Move the front and rear beams towards you.
PCB-Warp-Sensor Unit
1
2
Rear Front
EJM8A-E-SMA060502-A01-01
Page 6-5-2-2
Remarks
Option Part and Accessory Replacement
Item
PCB-Warp-Sensor Unit
Remove the amplifier connectors.
Cut off the cable tie. - (1)
Cut off the cable tie. - (2)
Remove the sensor connector.
8
7
5
6
Cut off the cable ties.
Remove the amplifier connectors.
Cut off the cable tie.
Turn the sensor connector (to the amplifier)
to the left. Remove the connector.
EJM8A-E-SMA060502-A01-01
Page 6-5-2-3