CM602all_EJM8AESM_Service Manual.pdf - 第989页
Open the right side cover of the control box. 2 1 Tray Open the cover of the control box section. Shuttle Tray Remove all connectors from the front side of the board. Phillips screwdriver #2 Screw M4 4 pcs. Phillips scre…
Tools
Jigs
Removal/Disassembly Assembly/Adjustment
Teaching
Total Part Weight
Min. Min. Min.
2020
kgs.
40
Min.
7-1-18 Removing the Control Box.
Shuttle TrayTray
This section describes the procedures for removing the control box.
None
Phillips screwdriver #1
Phillips screwdriver #2
Allen key 3 mm
Dange
r
Warning
Caution
EJM8A-E-SMA070118-A01-00
Page 7-1-18-1
Open the right side cover of the control box.
2
1
Tray
Open the cover of the control box section.
Shuttle Tray
Remove all connectors from the
front side of the board.
Phillips screwdriver #2
Screw M4 4 pcs.
Phillips screwdriver #2
Screw M4 4 pcs.
Remark
Switch off the power.
Item
3
4
EJM8A-E-SMA070118-A01-00
Page 7-1-18-2
Item
5
Tray Shuttle Tray
Cut off the cable ties on the front side.
Phillips screwdriver #2
Remove the four driver connectors.
Remark
Remove the screws.
Pull the door open.
Phillips screwdriver #1
Allen key 3 mm
Nipper
Screw M4 2 pcs.
Remove all right-side connectors.
6
7
8
EJM8A-E-SMA070118-A01-00
Page 7-1-18-3