CM602all_EJM8AESM_Service Manual.pdf - 第927页
12 34 Remarks loosen the bolts below and move the belt. Shuttle Tray Tray Allen key 3 mm Screw M4 2 pcs. If it is necessary to adjust the distance more than 3 mm, 19 20 Item 18 17 Carry out "Return to origin." …
Adjustable distance: +/- 3 mm
(The hole is 3-mm long.)
Tray Shuttle Tray
Item Remarks
13
Switch on the power.
Fit the jig on the door switch
connector.
15
Distance from Dog to
Stopper:
9.5㎜±1㎜
14
Measure the distance from the dog to the mechanical stopper.
Allen key 3 mm
Screw M4 2 pcs.
If it is necessary to adjust the distance, loosen the bolts that are positioned
at the back of the belt clamp, and adjust the distance.
16
Carry out "Return to origin."
(Be sure to keep yourself off the drive section.)
3
6.5
36.5
(30)
4.5
731.5
727st
－O/R
StrokeOrigin
＋O/R
Mechanical
stopper
Dog
＋soft limit
－soft limit
EJM8A-E-SMA070108-A01-00
Page 7-1-8-5
12
34
Remarks
loosen the bolts below and move the belt.
Shuttle TrayTray
Allen key 3 mm
Screw M4 2 pcs.
If it is necessary to adjust the distance more than 3 mm,
19
20
Item
18
17
Carry out "Return to origin." Check the distance.
Remove the jig from the door
switch connector.
Allen key 3 mm
M4×8L 3 pcs.
M4×10L 2 pcs.
M4×12L 2 pcs.
Put the cover back on the motor section.
30
B
A=727st
(770)
C
D
E
EJM8A-E-SMA070108-A01-00
Page 7-1-8-6
Item Remarks
Shuttle TrayTray
Allen key 3 mm
Phillips screwdriver #2
M4×8L 3 pcs.
M4×10L 2 pcs.
M5×15L Truss 2 pcs.
21
Put the top cover back on.
Allen key 3 mm
Phillips screwdriver #2
M4×8L 8 pcs.
M4×10L Truss 2 pcs.
See Section 7-1-2. "Shuttle
Tray Pickup Position
Teaching."
23
Close the maintenance door.
Allen key 3 mm
M4 x 10L 1 pc.
Connect the door switch connector.
24
22
Put the cover back on.
Once the mechanical adjustment is complete,
carry out machine parameter teaching.
Door switch of
Delivery position
EJM8A-E-SMA070108-A01-00
Page 7-1-8-7