CM602all_EJM8AESM_Service Manual.pdf - 第778页

Remark Item Component-Thickness-Measuring Unit Option Part and Accessory Replacement O p en the connector lock. (1) Insert the light-emitting cable (gray) for the nozzle front line (1 to 6) into the front side of the amp…

100%1 / 1093
Remark
Item
Component-Thickness-Measuring Unit
Option Part and Accessory Replacement
Open the connector lock.
Remove the sensor cables from the
a
m
p
lifi
e
r
co
nn
ecto
r l
oc
k
s
.
Pre
p
are the am
p
lifier
(
substitute
)
(1) AMP　LV11SA（CN39)
(2) AMP　LV11SA（CN40）
O
p
en the new am
p
lifier cover.
12
13
14
15
Open the connector lock
Remove the sensor cables from
the amplifier connector locks.
1
2
Open the amplifier cover.
EJM8A-E-SMA060401-A01-01
Page　6-4-1-5
Remark
Item
Component-Thickness-Measuring Unit
Option Part and Accessory Replacement
O
p
en the connector lock.
(1) Insert the light-emitting cable (gray) for the
nozzle front line (1 to 6) into the front side of
the amplifier connector 40.
Next, insert the light-sensing cable (black) for
the nozzle front line (1 to 6) into the rear side
of the amplifier connector 40.
(2) Insert the light-emitting cable (gray) for the
nozzle rear line (7 to 12) into the front side of
the amplifier connector 39.
Next, insert the light-sensing cable (black) for
the nozzle rear line (7 to 12) into the rear side
of the amplifier connector 39.
16
19
17
18
Insert the sensor cable into the am
p
lifier. -
(
1
)
Insert the sensor cables into the am
p
lifier. -
(
2
)
Put the connector-lock hook on the amplifier.
Open the connector
lock.
Open the connector
lock.
Front
Rear
Put the sensor cables between the connector
locks of the amplifier.
Insert the sensor cables
for the front (1 to 6) and
for the rear (7 to 12) into
the amplifier.
Put the connector-lock
hook on the amplifier.
EJM8A-E-SMA060401-A01-01
Page　6-4-1-6
Remark
Item
Component-Thickness-Measuring Unit
Option Part and Accessory Replacement
Lock the connector lock of the am
p
lifier.
Put the am
p
lifier on the bracket.
Move the amplifier in the (1) and (2)
directions below, and fit the amplifier.
Component-height-
detection-sensor-
adjusting power source.
FM-1853(1)
21
22
20
23
Connect the amplifier connector to the component-thickness-sensor-adjusting jig.
Prepare the component-height-detection-sensor-adjusting power source.
Lock the connector
lock of the amplifier.
Component-height-detection-sensor-adjusting
power source.
<FM-1853(1)>
Connect the amplifier connector to
the component-height-detection-
sensor-adjusting power source.
This hook can
move.
1
2
EJM8A-E-SMA060401-A01-01
Page　6-4-1-7