CM602all_EJM8AESM_Service Manual.pdf - 第949页
Tray Shuttle Tray Cut off the cable ties on the right side. Pull out the box. Remove the driver connectors. 6 7 8 Be careful not to let the cables be caught. Phillips precision screwdriver Connector screws Remove the con…
Tray Shuttle Tray
3
4
Remove the connector from the right side of the box.
2
1
Item
Remove all connectors from the front board.
Phillips precision
screwdriver
Connector screw
Remove the front and the side covers from the control box.
Phillips screwdriver #2
Screw M4 4 pcs.
90578
Power down the machine.
Remarks
EJM8A-E-SMA070112-A01-00
Page 7-1-12-2
Tray Shuttle Tray
Cut off the cable ties on the right side.
Pull out the box. Remove the driver connectors.
6
7
8
Be careful not to let the
cables be caught.
Phillips precision
screwdriver
Connector screws
Remove the connectors.
Nipper
Cut off the front cable ties.
Remove the box holding screws.
Allen key 4 mm
Screw M5 2 pcs.
Open the front cover.
Phillips screwdriver #2
Item Remarks
5
EJM8A-E-SMA070112-A01-00
Page 7-1-12-3
Tray Shuttle Tray
10
11
12
MR-J2-20A-N26
Allen key 4 mm
Screw M5 2 pcs.
Connect all driver connectors.
Install the box.
Item Remarks
Phillips precision
screwdriver
Connector screws
Install the driver. Connect the relay connectors.
9
Phillips precision
screwdriver
Connector screws
Remove the relay connectors and the
driver holding screws.
Be careful not to let the
cable be caught.
Phillips precision
screwdriver
Connector screws
Fix the box and the cable in place.
EJM8A-E-SMA070112-A01-00
Page 7-1-12-4