CM602all_EJM8AESM_Service Manual.pdf - 第750页

2 1 Remove the feeder cover and the chute. Switch OFF the main power and air supply. Optional Part and Accessory Replacement Nozzle Changer Unit (3-nozzle type) Tool/Spec./Installation Tool/Spec./Installation Item Remark…

100%1 / 1093
・Tools
・Jigs
6-2-3　　　　　 Nozzle Changer Replacement (Multi-Purpose Machines)
Nozzle Changer Unit (3-nozzle type)Optional Part and Accessory Replacement
• This section describes the procedures for replacing the multi-purpose nozzle changer.
Phillips screwdriver #2
Allen key 3 mm
Allen key 4 mm
Iron plate
Dial gauge
Magnetic stand
FM-0727
Position teaching jig
kgs.
10
Min.
Removal/Disassembly Assembly/Adjustment
Teaching
Total Part Weight
10
Min.
20
Min.Min.
Danger
Caution
Warning
EJM8A-E-SMA060203-A01-00
Page 6-2-3-1
2
1
Remove the feeder cover and the chute.
Switch OFF the main power and
air supply.
Optional Part and Accessory Replacement Nozzle Changer Unit (3-nozzle type)
Tool/Spec./Installation
Tool/Spec./Installation
Item Remark
4
3
Disconnect the nozzle changer
connectors.
Phillips screwdriver #2
Allen key 3 mm
Screw M4 2 pcs.
Screw M4 3 pcs.
Phillips screwdriver #2
Screw M4 4 pcs.
J1■35=Open,
J1■36=Closed
　■=
　AF　-　2
　AR　-　4
　BF　-　B
　BR　-　D
Tool/Spec./Installation
Tool/Spec./Installation
Remove the right side cover.
EJM8A-E-SMA060203-A01-00
Page 6-2-3-2
Slide the shutter.
Place it on the bottom of the head
holding bracket.
Slide the shutter.
Remove the nozzle changer.
Tool/Spec./Installation
Allen key 4 mm
Screw M5 3 pcs.
6
5
Disconnect the cylinder air tube.
Tool/Spec./Installation
RemarkItem
Allen key 4 mm
Screw M5 3 pcs.
8
7
Install the nozzle changer.
Tool/Spec./Installation
Place the iron plate on the bottom of
Tool/Spec./Installation
the head.
Iron plate
Magnetic stand
Dial gauge
Screw M4
Nozzle Changer Unit (3-nozzle type)Optional Part and Accessory Replacement
EJM8A-E-SMA060203-A01-00
Page 6-2-3-3