CM602all_EJM8AESM_Service Manual.pdf - 第553页
Refer to "Head Camera Adjustment --- Focus and Theta --." Adjust the camera. 10 11 Put the head cover back on. Phillips screwdriver #1 Phillips screwdriver #2 Screw M3 8 pcs. M4 4 pcs. Section 4-1-2 Tools and S…
Top view
Take care with the orientation of the
Connect the connector.
Tools and Specifications
8
7
6
5
Fit the LED lamp into the new camera.
Tools and Specifications
Allen key 3 mm
Screw M4 4 pcs.
Tools and Specifications
connector.
Install the camera. Lightly tighten the screws so that the camera will not fall.
Tools and Specifications
Allen key 3 mm
Screw M4 4 pcs.
Remove the LED lamp from the camera.
Machinery Part Replacement Head Camera Unit
Item Remarks
Camera connector
LED cable
Take care with the orientation of the
camera. (Check the connector position.)
EJM8A-E-SMA050602-A01-00
Page 5-6-2-3
Refer to "Head Camera Adjustment
--- Focus and Theta --."
Adjust the camera.
10
11
Put the head cover back on.
Phillips screwdriver #1
Phillips screwdriver #2
Screw M3 8 pcs.
M4 4 pcs.
Section 4-1-2
Tools and Specifications
Tools and Specifications
9
Switch on the main power.
Item Remarks
Machinery Part Replacement Head Camera Unit
Tools and Specifications
EJM8A-E-SMA050602-A01-00
Page 5-6-2-4
Kgs.
Weight o
f
Part
20 min. 47 min. min.
67
min.
Removal
Disassembly
A
ssembly
Adjustment
Teaching Total Time
・Tools
5-6-3 Head-Camera LED Light Replacement
Machinery Part Replacement Head Camera Unit
This section describes the procedures for replacing the head LED light.
Phillips screwdriver #1
Phillips screwdriver #2
Allen key 3 mm
FM-1112
Head Camera Height Jig
・Jig
Dange
r
Warning
Caution
EJM8A-E-SMA050603-A01-00
Page 5-6-3-1