CP643 系统参考.pdf - 第162页

AUT O 100-0-0 Command Pass: [AUTO] The automatic production is performed. Revision History Cam Org Pos 120-0-0 Command Pass: [AUTO] - [Cam Org Pos] Press to return cam axis to its origin position. While this key remains …

3. Command Descriptions

For the most part, command explanations are presented in a one-page-per-command format, with the

commands listed in their hierarchy order (from shallow to deep levels). Command pages can be

displayed at the machine to determine a command’s hierarchy level. The page format shown below is

used to explain the commands.

Command Title Command Page

Command Pass:

------------------------------------------------------------------------------------------------

(Explanation of the command.)

Edition 1.0 CP643E System Reference3-2-x

(Revision history of the command.)

Revision History

Vx.xx

CP643S3008

Part 3 Chapter 3 Command Descriptions

Edition 1.0 3-3-1 CP643E System Reference

AUTO 100-0-0

Command Pass: [AUTO]

The automatic production is performed.

Revision History

Cam Org Pos 120-0-0

Command Pass: [AUTO] - [Cam Org Pos]

Press to return cam axis to its origin position. While this key remains pressed the cam will move

toward its origin position. Movement stops when the cam returns to its origin. Movement also

stops if the key is released before the cam reaches its origin.

The message “Return Cam to Zero” displays in the second display area until the cam reaches its

origin. When the cam has returned the message “Press START” displays.

Revision History

MARK EDITOR 130-0-0

Command Pass: [AUTO] - [MARK EDITOR]

This command is used to edit the fiducial mark.

If there is not a fiducial sequence in the production program, this cannot be used.

Input the desired sequence number using the numeric keypad.

If the sequence number input has been entered the display goes to command page 130’.

Caution: This is a help command for irregular marks. If the mark sequence coordinates are obviously wrong

then revise the production program and then transmit the program again from the host computer.

Operators should also be aware beforehand that if this command is used the placing accuracy may

not fall within the accuracy range guaranteed by Fuji.

Revision History

Part 3 Chapter 3 Command Descriptions

Edition 1.0 3-3-2 CP643E System Reference

MARK EDITOR 130’-0-0

Command Pass: [AUTO] - [MARK EDITOR]

Second Display Area

When completing the necessary conditions: “Waiting for START” will display.

When the conditions are not completed: An error message will display.

When the START button is pressed

Pressing the START button will move the board so that the selected fiducial mark is under the mark

read camera (movement is based on the coordinates specified by the user).

Revision History

SET DATA 130''-1-0

Command Pass: [AUTO] - [MARK EDITOR] - [SET DATA]

This function key is used to manually set the fiducial mark coordinates. When this key is pushed,

the difference between the fiducial mark coordinates and the current position coordinates become

the correction factor. This key will not display if all the marks are being read correctly.

When it is necessary to revise the current position, adjust using the inching key and then push this

button.

When this difference is larger than the camera's field of vision, this will be displayed as an "Input

Error". When the data is being set, "Set Data" will display on the screen.

When the operator wants to release the value that was input manually, if the key is pushed again

the value is released and the expression "Set Data" will disappear.

If Automatic production is then entered , the mark will be processed.

Caution: The changes that were set while in the Mark Editor Mode, such as Mark Sequence Skip or other

manual input, are only valid for the board that is being produced. After that board production is

finished and the board has been unloaded, the machine automatically releases those settings and the

following boards will be produced under normal settings. Also, if a condition arises where it becomes

necessary to read that fiducial mark, it will be necessary to read the mark that was set to be skipped.

Revision History

Part 3 Chapter 3 Command Descriptions

Edition 1.0 3-3-3 CP643E System Reference