CP643 系统参考.pdf - 第3页

About This Manual This manual contains important machine information for the user. The manual content is intended for specialized technicians who are familiar with the systems used in this machine. Please read this manua…

Notice

1. All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This

manual may not, in whole or in part, be reproduced by any means (electronic, mechanical or

otherwise), or reused in any way, without the prior written permission of Fuji Machine

Manufacturing Co., Ltd.

2. Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for any situations that may arise as

a result of the use of this manual.

3. Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual

without notice.

4. Every effort has been made to ensure that this manual is correct in every detail. However, please

contact Fuji in the unlikely event that errors or omissions are detected.

is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the

following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,

Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K., and the

U.S.A.

Fuji Machine Manufacturing Co., Ltd. serves its customers from the following locations:

Fuji Machine Manufacturing Co., Ltd.

19 Chausuyama Yamamachi, Chiryu, Aichi, 472-8686 Japan

Tel: (0566) 81 - 2111 Fax: (0566) 83 - 1140

Fuji America Corporation

171 Corporate Woods Parkway, Vernon Hills, IL. 60061 USA

Tel: (847) 913-0162 Fax: (847) 913-0186

Fuji Machine Mfg (Europe) GmbH

Peter-Sander-Str. 43, D-55252 Mainz-Kastel Germany

Tel: 06134-202120 Fax: 06134-202200

Fuji do Brasil Maquinas Industriais Ltda.

Rua Joao Cachoeira,

128 Itaim Bibi, Sao Paulo, SP 04535-000 Brazil

Tel: 11-3064-7650 Fax: 11-852-6833

Fuji Machine Philippines, Inc.

Warehouse 888 Don Mariano Lim

Industrial Complex (La Fuerza Compound) Alabang, Zapote Rd.,

Almanza Uno Las Pinas City, Philippines

Tel: (02) 809-4565 Fax: (02) 807-2767

Fuji Singapore Office

C/O Mecomb Singapore Limited

Sime Darby Centre, 896 Dunearn Road #04-03A, Singapore 589472

Tel: 4675952 Fax: 4693758

Fuji Malaysia Office

C/O Mecomb Malaysia Sdn Bhd

2487, Jalan Sultan Azlan Shah, 11700 Penang, Malaysia

Tel: (04) 656-4002 Fax: (04) 656-2941

Fuji Taiwan Office

C/O Ascentex Industry Corp.

3 Fl, No. 396, Sec. 1, Nei Hu Rd., Taipei, Taiwan R.O.C.

Tel: (02) 8797-8716 Fax: (02) 8797-8717

About This Manual

This manual contains important machine information for the user.

The manual content is intended for specialized technicians who are familiar with the

systems used in this machine.

Please read this manual carefully in order to ensure safe and efficient machine

maintenance.

Some of the machine names used in this manual are not the formal machine names.

(Formal machine name) (Notation used in this manual)

FUJI CP-643E CP-643E

FUJI CP-643ME CP-643ME

Note that all of these machine types are also distinguished further based on differences

in the PCB size that can be handled by the machine. There are two versions; a 4000 type

and 5000 type that are derived based on the relevant PCB size.

CP-643E and CP-643ME are 4000 type machines.

Unless specified the descriptions for the CP-643E can be applicable to the CP-643ME.

Manual Structure

This manual consists of the following seven parts.

Safety Guidelines

Part 1 Introduction

Part 2 Operation

Part 3 Commands

Part 4 Proper Data

Part 5 Messages

Part 6 I/O Map

About this Manual

Edition 1.1 i CP643E System Reference

Page Layout

Each page indicates the part title, chapter number and title, section title , manual name,

page

number, and the version number.

Part number

The part number to which each chapter belongs is shown on the header on each page.

Chapter number and title

The title of each chapter is shown in the header on each page. Each part may contain one

or more chapters.

Section title

Each chapter may be divided into several sections. The section number is composed of

the number of the chapter to which the section belongs, followed by a sequential number

for each section.

Chapter 1 Basic Operation

1.1 General Machine Info

1.1.1 Definition of Coordinates

The machine coordinate system is defined in the picture below. These coordinates are

used in displays, Proper data, and programming.

Device Table 2 Device Table 1

Index

XY-table

Theta (Pθ, Fθ, FRθ, PRθ)

D2+ D1-

X+

View from top

Y+

XY-table

Z+

Z-

View from front

CP643S2001

Part 2 Chapter 1 Basic Operation

Edition 1.0 2-1-1 CP643E System Reference

Chapter number and title

Part number

Chapter title

Edition number Page number Manual name

CP643S0001

Section title

Body

About this Manual

Edition 1.1 ii CP643E System Reference