CP643 系统参考.pdf - 第265页
AXIS AREA SVR Command Pass: [SET] - [SERVO] - [TRACE LIST] - [AXIS AREA] This displays the data in each axis area of each servo board. Input the desired board number or axis number using the numeric keypad. This determin…
CONV WIDTH (Displayed for HELPS) 542-0-0
Command Pass: [SET] - [SERVO] - [CONV WIDTH]
Press to set or change the conveyor width.
This function key is effective only when the machine is set to automatically adjust conveyor width.
The current conveyor width is displayed in increments of 0.01 mm.
Using the [↑] and [↓] keys the conveyor width can be changed.
Also, the width can be entered in 0.01 mm increments using the numerical keypad.
Calibrate the current conveyor width and input in increments of 0.01 mm. However, input is only
possible in a range from the minimum PCB width to the maximum PCB width.
Revision History
TRACE LIST 544-0-0
Command Pass: [SET] - [SERVO] - [TRACE LIST]
This command is used to display the status of servo boards.
Caution: This command is used for debugging and should not be entered by the user.
Revision History
COMMON AREA SVR
Command Pass: [SET] - [SERVO] - [TRACE LIST] - [COMMON AREA]
This displays the data found in the common area of all servo boards.
Input the desired board number or axis number using the numeric keypad.
This determines which servo board (or axis) data is to be displayed.
Caution: This command is used for debugging and should not be entered by the user.
Revision History
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-104 CP643E System Reference
AXIS AREA SVR
Command Pass: [SET] - [SERVO] - [TRACE LIST] - [AXIS AREA]
This displays the data in each axis area of each servo board.
Input the desired board number or axis number using the numeric keypad.
This determines which servo board (or axis) data is to be displayed.
Caution: This command is used for debugging and should not be entered by the user.
Revision History
TRACE DATA SVR
Command Pass: [SET] - [SERVO] - [TRACE LIST] - [TRACE DATA]
This displays the trace data of each servo board.
Input the desired board number or axis number using the numeric keypad.
This determines which servo board (or axis) data is to be displayed.
Caution: This command is used for debugging and should not be entered by the user.
Revision History
+Page SVR
Command Pass: [SET] - [SERVO] - [TRACE LIST] - [TRACE DATA]
- [COMMON AREA]/[AXIS AREA]/[TRACE DATA] - [+Page]
This command advances the data display forward by one page (40 hex).
Caution: This command is used for debugging and should not be entered by the user.
Revision History
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-105 CP643E System Reference
-Page SVR
Command Pass: [SET] - [SERVO] - [TRACE LIST] - [TRACE DATA]
- [COMMON AREA]/[AXIS AREA]/[TRACE DATA] - [-Page]
This command returns the data display back by one page (40 hex).
Caution: This command is used for debugging and should not be entered by the user.
Revision History
+Line SVR
Command Pass: [SET] - [SERVO] - [TRACE LIST] - [TRACE DATA]
- [COMMON AREA]/[AXIS AREA]/[TRACE DATA] - [+Line]
This command advances the data display forward by one line (8 hex).
Caution: This command is used for debugging and should not be entered by the user.
Revision History
-Line SVR
Command Pass: [SET] - [SERVO] - [TRACE LIST] - [TRACE DATA]
- [COMMON AREA]/[AXIS AREA]/[TRACE DATA] - [-Line]
This command returns the data display back by one line (8 hex).
Caution: This command is used for debugging and should not be entered by the user.
Revision History
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-106 CP643E System Reference