CP643 系统参考.pdf - 第324页

825: Wide Camera Center A1 Y 0 ~ 30000000 ✩ * ⇓ 844: Wide Camera Center T1 Y 0 ~ 30000000 ✩ * These items represent the Y-coordinates for the center of rotation of the No.1 nozzles on head A through T respectively when n…

725: Wide Camera Center A5 X 0 ~ 30000000 ✩*

⇓

744: Wide Camera Center T5 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.5 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

745: Wide Camera Center A5 Y 0 ~ 30000000 ✩*

⇓

764: Wide Camera Center T5 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.5 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

765: Wide Camera Center A6 X 0 ~ 30000000 ✩*

⇓

784: Wide Camera Center T6 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.6 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

785: Wide Camera Center A6 Y 0 ~ 30000000 ✩*

⇓

804: Wide Camera Center T6 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.6 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

805: Narrow Camera Center A1 X 0 ~ 30000000 ✩*

⇓

824: Narrow Camera Center T1 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.1 nozzles on

head A through T respectively when nozzle center measurement is carried out on the

narrow view parts camera. The value that displays here must be divided by a factor of

65536 to obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

Part 4 Chapter 2 Details of Proper Data

Edition 1.1 4-2-24 CP643E System Reference

825: Wide Camera Center A1 Y 0 ~ 30000000 ✩*

⇓

844: Wide Camera Center T1 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.1 nozzles on

head A through T respectively when nozzle center measurement is carried out on the

narrow view parts camera. The value that displays here must be divided by a factor of

65536 to obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

845: Narrow Camera Center A2 X 0 ~ 30000000 ✩*

⇓

864: Narrow Camera Center T2 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.2 nozzles on

head A through T respectively when nozzle center measurement is carried out on the

narrow view parts camera. The value that displays here must be divided by a factor of

65536 to obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

865: Narrow Camera Center A2 Y 0 ~ 30000000 ✩*

⇓

884: Narrow Camera Center T2 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.2 nozzles on

head A through T respectively when nozzle center measurement is carried out on the

narrow view parts camera. The value that displays here must be divided by a factor of

65536 to obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

885: Narrow Camera Center A3 X 0 ~ 30000000 ✩*

⇓

904: Narrow Camera Center T3 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.3 nozzles on

head A through T respectively when nozzle center measurement is carried out on the

narrow view parts camera. The value that displays here must be divided by a factor of

65536 to obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

905: Narrow Camera Center A3 Y 0 ~ 30000000 ✩*

⇓

924: Narrow Camera Center T3 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.3 nozzles on

head A through T respectively when nozzle center measurement is carried out on the

narrow view parts camera. The value that displays here must be divided by a factor of

65536 to obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

Part 4 Chapter 2 Details of Proper Data

Edition 1.1 4-2-25 CP643E System Reference

925: Narrow Camera Center A4 X 0 ~ 30000000 ✩*

⇓

944: Narrow Camera Center T4 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.4 nozzles on

head A through T respectively when nozzle center measurement is carried out on the

narrow view parts camera. The value that displays here must be divided by a factor of

65536 to obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

945: Narrow Camera Center A4 Y 0 ~ 30000000 ✩*

⇓

964: Narrow Camera Center T4 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.4 nozzles on

head A through T respectively when nozzle center measurement is carried out on the

narrow view parts camera. The value that displays here must be divided by a factor of

65536 to obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

965: Narrow Camera Center A5 X 0 ~ 30000000 ✩*

⇓

984: Narrow Camera Center T5 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.5 nozzles on

head A through T respectively when nozzle center measurement is carried out on the

narrow view parts camera. The value that displays here must be divided by a factor of

65536 to obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

985: Narrow Camera Center A5 Y 0 ~ 30000000 ✩*

⇓

1004: Narrow Camera Center T5 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.5 nozzles on

head A through T respectively when nozzle center measurement is carried out on the

narrow view parts camera. The value that displays here must be divided by a factor of

65536 to obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

1005: Narrow Camera Center A6 X 0 ~ 30000000 ✩*

⇓

1024: Narrow Camera Center T6 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.6 nozzles on

head A through T respectively when nozzle center measurement is carried out on the

narrow view parts camera. The value that displays here must be divided by a factor of

65536 to obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

Part 4 Chapter 2 Details of Proper Data

Edition 1.1 4-2-26 CP643E System Reference