CP643 系统参考.pdf - 第31页
(2) Rear View of the Machine <Models with Fence> <Models with Rear Cover> Filter Waste tape box Operation box 2 Noise reduction box Rear cover CP643S1003 Parts set complete switch Parts set complete switch No…
1.2 Machine Components
1.2.1 Description of the Machine
The names of each part of the machine for the CP-643E series machines that are
mentioned in this manual are given in the figure below.
(1) Front View of the Machine
Servo box 2
Servo box 1
XY-table
Control box 1
Control box 2
Out-conveyor
Breaker
In-conveyor
Placing head
Operation box 1
Optical correction camera
Index Unit
Cam box
Oil cooler
CP643S1001
Part 1 Chapter 1 Machine Overview
Edition 1.1 1-1-4 CP643E System Reference
(2) Rear View of the Machine
<Models with Fence>
<Models with Rear Cover>
Filter
Waste tape box
Operation box 2
Noise reduction box
Rear cover
CP643S1003
Parts set
complete switch
Parts set
complete switch
Noise reduction box
Filter
Waste tape box
Rear fence
Shutter 1
Operation box 2
Shutter 2
Device table 2
Feeder
Waste tape cutter
Device table 1
CP643S1002
Parts set
complete switch
Parts set
complete switch
Part 1 Chapter 1 Machine Overview
Edition 1.1 1-1-5 CP643E System Reference
(3) Adjustable Rail Engagement Sensor
The following laser type sensor is used on the CP-643E/643ME as the main conveyor’s
adjustable rail engagement sensor.
Item name: Laser type fiber sensor
Model: FS-L71
Wavelength: 670 mm
Max. output: 3 mW
Class: 2
The following safety measures are taken:
• Laser emission indicator lamp
The amplifier is equipped with an LED lamp which indicates when a laser beam is being
emitted. The operator can see that this LED is on even when wearing protective goggles.
• Laser beam shield
A laser beam shield which can be attached to the fiber unit is supplied with FS-L series
sensors. Be sure to attach this shield when the operator must work in front of the fiber
unit where there is a risk of eye injury caused by the laser beam.
• Stopping the laser emission
Laser beam emission is stopped when the fiber unit is disconnected from the amplifier
unit.
Fiber unit
Laser beam shield attached
CP643S1005
CP643S1004
Adjustable rail engagement sensor 1
Adjustable rail engagement sensor 2
Adjustable rail engagement
sensor 3
Out-conveyor
Out-carrier
In-conveyor
In-carrier
Part 1 Chapter 1 Machine Overview
Edition 1.1 1-1-6 CP643E System Reference