CP643 系统参考.pdf - 第18页
Safety Guidelines Edition 1.0 7 CP643E System Reference 3. Safety Rules for Individual Machine T ypes CP-series Machines W ARNING Do not reach into the machine over the rear fence during operation. ● Body parts or clothi…
Safety Guidelines
Edition 1.0 6 CP643E System Reference
Be sure to wear protective glasses.
● Be sure to wear protective glasses.
[Example]
CP-6 nozzles use springs which may be propelled during
disassembly. Be sure to handle the nozzles carefully to prevent eye
injuries.
Check the machine monitor and the target axes
while manually operating the machine.
● When operating the machine, carefully follow the instructions that
are displayed at the machine display.
● Operating the machine without looking at the machine display may
lead to operating errors or result in damage to the machine or
products.
WARNING
CAUTION
Do not operate the machine after removing or disabling
sensors.
● Removing or disabling sensors will disarm the interlock, leading to
collisions and damage to the machine.
Check the machine display to determine whether
HELPS compatible machines are in the middle of
performing changeover.
● During operation in automatic mode on machines equipped with
automatic changeover equipment, it may be difficult to actually see
automatic changeover taking place from the front of the machine.
When a message appears at the machine display, follow the
instructions that are given.
Safety Guidelines
Edition 1.0 7 CP643E System Reference
3. Safety Rules for Individual Machine Types
CP-series Machines
WARNING
Do not reach into the machine over the rear fence
during operation.
● Body parts or clothing may be caught in the machine causing
personal injury.
Do not enter within the safety fence, even in cases of an
emergency stop.
● When an emergency stop occurs in step mode, power to the servo
amps is only cut after all axes have stopped moving. As a result,
there may be a short delay between the moment the emergency
arises and the power to the servo amps is cut.
● Do not enter the safety fence immediately following an emergency
stop, body parts or clothing may be caught in the machine causing
personal injury.
Do not operate the machine after removing the
transparent shutters from the D-axis.
● Body parts or clothing may be caught in the machine causing
personal injury.
Do not lean on the in- and out-conveyors during
operation.
● During operation do not lean on or across the in- and out-conveyors
to check the feeders.
Turn the power off when inspecting the cam box.
● When inspecting the upper part of the cam box, turn off the power
to the machine and exercise sufficient caution.
Safety Guidelines
Edition 1.0 8 CP643E System Reference
Make sure the cam is at its origin (0 deg.)
● Exercise extreme caution when working on the machine if the cam
is not at its origin (0 deg.). (The cam may not stop at its origin (0
deg.) in an emergency stop.) Recoil of the cam axis can endanger
the operator.
● If the cam is not at its origin (0 deg.), use a crank to rotate the cam
shaft until the indicator points to 0 degrees.
Do not stare into the laser beam.
● The CP-643E / CP-643ME is equipped with laser type
fiber sensors (class 2). Exercise extreme caution
when working in areas where there is a risk of eye
damage from the laser beams.
WARNING