CP643 系统参考.pdf - 第213页
ZOOM IN 522-1-4-1/522-3-1-2-1 Command Pass: [SET] - [MANUAL] - [VISION] - [BUFFER IMG] - [DISPLAY] - [ZOOM IN] / [SET] - [MANUAL] - [VISION] - [ADJUSTMENT] - [GET ACQ.] - [DISPLAY] - [ZOOM IN] This command magnifies the …
TEMP. TRACE 522-1-2
Command Pass: [SET] - [MANUAL] - [VISION] - [BUFFER IMG] - [TEMP. TRACE]
The [TEMP. TRACE] command is used to carry out trace settings for graphically displaying the
vision processing trace.
Refer to the explanation of the [TRACE] command regarding the details of these trace settings.
Revision History
V1.10 and later
SEL BUF IMG 522-1-3
Command Pass: [SET] - [MANUAL] - [VISION] - [BUFFER IMG] - [SEL BUF IMG]
The [SEL BUF IMG] command is used to toggle between the image numbers.
The toggled image number is selected and the image becomes the relevant image for reinspection or
display.
Revision History
V1.10 and later
DISPLAY 522-1-4/522-3-1-2
Command Pass: [SET] - [MANUAL] - [VISION] - [BUFFER IMG] - [DISPLAY]
/[SET] - [MANUAL] - [VISION] - [ADJUSTMENT] - [GET ACQ.] - [DISPLAY]
This command displays the buffer image or acquired image on the vision processing monitor. In
addition, it changes the screen to the command page that displays commands used for zooming in,
zooming out, and scrolling the image.
Revision History
V1.10 and later
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-52 CP643E System Reference
ZOOM IN 522-1-4-1/522-3-1-2-1
Command Pass: [SET] - [MANUAL] - [VISION] - [BUFFER IMG] - [DISPLAY] - [ZOOM IN] / [SET]
- [MANUAL] - [VISION] - [ADJUSTMENT] - [GET ACQ.] - [DISPLAY] - [ZOOM IN]
This command magnifies the image that is displayed on the vision processing monitor. The image
is magnified further each time the function key is pressed. The maximum magnification rate is 128
times.
A magnified image can be used to verify a portion of an image that cannot be confirmed with the
focus and gray scale value per pixel of the normal monitor display.
Revision History
V1.10 and later
ZOOM OUT 522-1-4-2/522-3-1-2-2
Command Pass: [SET] - [MANUAL] - [VISION] - [BUFFER IMG] - [DISPLAY] - [ZOOM OUT]
/ [SET] - [MANUAL] - [VISION] - [ADJUSTMENT] - [GET ACQ.] - [DISPLAY]
- [ZOOM OUT]
This command reduces the image that is displayed on the vision processing monitor. The image is
reduced further each time the function key is pressed. The maximum magnification rate is 1/128
times. This zooming out function can be used to return a magnified image to its original size or to
check the entire image.
Note: An image cannot be reduced further than the image size originally acquired by the CCD camera.
Revision History
V1.10 and later
SCROLL 522-1-4-4/522-3-1-2-4
Command Pass: [SET] - [MANUAL] - [VISION] - [BUFFER IMG] - [DISPLAY] - [SCROLL]
/[SET] - [MANUAL] - [VISION] - [ADJUSTMENT] - [GET ACQ.] - [DISPLAY]
- [SCROLL]
In the [SCROLL] command the direction of movement (up, down, left or right) changes each time
the function key is pressed. In the case of a magnified image, the [SCROLL] command can be used
to display one portion of the image in order to check that portion.
Revision History
V1.10 and later
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-53 CP643E System Reference
<<< 522-1-4-4-1
Command Pass: [SET] - [MANUAL] - [VISION] - [BUFFER IMG] - [DISPLAY] - [SCROLL] - [<<<]
This command will display the left portion of the image currently being displayed.
In other words, the image being displayed is moved to the right so that the left portion of the image
displays. Each time the function key is pressed the image will move by the number of pixels
specified using [STEP].
Revision History
V1.10 and later
>>> 522-1-4-4-2
Command Pass: [SET] - [MANUAL] - [VISION] - [BUFFER IMG] - [DISPLAY] - [SCROLL] - [>>>]
This command will display the right side portion of the image currently being displayed.
In other words, the image being displayed is moved to the left so that the right portion of the image
displays. Each time the function key is pressed the image will move by the number of pixels
specified using [STEP].
Revision History
V1.10 and later
▲ 522-1-4-4-3
Command Pass: [SET] - [MANUAL] - [VISION] - [BUFFER IMG] - [DISPLAY] - [SCROLL] - [▲]
This command will display the upper portion of the image currently being displayed.
In other words, the image being displayed is moved downward so that the upper portion of the
image displays. Each time the function key is pressed the image will move by the number of pixels
specified using [STEP].
Revision History
V1.10 and later
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-54 CP643E System Reference