CP643 系统参考.pdf - 第222页
ADJUST 522-3-0 Command Pass: [SET] - [MANUAL] - [VISION] - [ADJUSTMENT] Commands related to camera adjustment are grouped together under the [ADJUSTMENT] command. Revision History V1.10 and later GET ACQ 522-3-1 Command …
▲ 522-2-1
Command Pass: [SET] - [MANUAL] - [VISION] - [TRACE] - [▲]
Press to move the cursor upward on the vision processing screen.
Revision History
V1.10 and later
▼ 522-2-2
Command Pass: [SET] - [MANUAL] - [VISION] - [TRACE] - [▼]
Press to move the cursor downward on the vision processing screen.
Revision History
V1.10 and later
ON / OFF 522-2-3
Command Pass: [SET] - [MANUAL] - [VISION] - [TRACE] - [ON / OFF]
Press to select or cancel the item identified by the cursor.
Revision History
V1.10 and later
CLEAR 522-2-4
Command Pass: [SET] - [MANUAL] - [VISION] - [TRACE] - [CLEAR]
Press to cancel all of the trace mode settings.
Revision Hisotry
V1.10 and later
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-61 CP643E System Reference
ADJUST 522-3-0
Command Pass: [SET] - [MANUAL] - [VISION] - [ADJUSTMENT]
Commands related to camera adjustment are grouped together under the [ADJUSTMENT]
command.
Revision History
V1.10 and later
GET ACQ 522-3-1
Command Pass: [SET] - [MANUAL] - [VISION] - [ADJUSTMENT] - [GET ACQ.]
The [GET ACQ.] command can be used to adjust the camera focus and image brightness, and to
verify the status of an acquired image.
Revision History
V1.10 and later
GET ACQ 522-3-1-1
Command Pass: [SET] - [MANUAL] - [VISION] - [ADJUSTMENT] - [GET ACQ.] - [GET ACQ]
This command is used to acquire an image. The camera and light source can also be set from this
command.
Revision History
V1.10 and later
▲ / ▼ 522-3-1-1-3-1/2
Command Pass: [SET] - [MANUAL] - [VISION] - [ADJUSTMENT] - [GET ACQ.] - [GET ACQ]
[CHANGE] - [▲ / ▼]
This command is used to select the camera or light source type.
Revision History
V1.10 and later
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-62 CP643E System Reference
CHANGE 522-3-1-1-3
Command Pass: [SET] - [MANUAL] - [VISION] - [ADJUSTMENT] - [GET ACQ.] - [GET ACQ.]
- [CHANGE]
This command is used to change the camera type or light source type that is used for image
acquisition.
Camera · Light source selection
Align the cursor with the camera or light source to be used for image acquisition and press
RETURN to select.
This display is the screen display for carrying out camera selection.
This display is the screen display for carrying out light source selection.
Revision History
V1.10 and later
▲▼
CP643S3020
RETURN
SELECT LIGHT SOURCE
Page 522
Select No.
1. Back Light
2. Front Light
▲▼
CP643S3019
RETURN
SELECT CAMERA
Page 522
Select No.
1. Mark Camera
2. Wide View Camera
3. Narrow View Camera
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-63 CP643E System Reference