CP643 系统参考.pdf - 第5页
Body The information needed to understand the workings of the machine and how to perform operation is explained using text and illustrations. Page number A three digit hyphenated number appears in the footer on each page…
Page Layout
Each page indicates the part title, chapter number and title, section title , manual name,
page
number, and the version number.
Part number
The part number to which each chapter belongs is shown on the header on each page.
Chapter number and title
The title of each chapter is shown in the header on each page. Each part may contain one
or more chapters.
Section title
Each chapter may be divided into several sections. The section number is composed of
the number of the chapter to which the section belongs, followed by a sequential number
for each section.
s
Chapter 1 Basic Operation
1.1 General Machine Info
1.1.1 Definition of Coordinates
The machine coordinate system is defined in the picture below. These coordinates are
used in displays, Proper data, and programming.
Device Table 2 Device Table 1
Index
XY-table
Theta (Pθ, Fθ, FRθ, PRθ)
D2+ D1-
X+
View from top
Y+
+
+
XY-table
Z+
Z-
View from front
CP643S2001
Part 2 Chapter 1 Basic Operation
Edition 1.0 2-1-1 CP643E System Reference
Chapter number and title
Part number
Chapter title
Edition number Page number Manual name
CP643S0001
Section title
Body
About this Manual
Edition 1.1 ii CP643E System Reference
Body
The information needed to understand the workings of the machine and how to perform
operation is explained using text and illustrations.
Page number
A three digit hyphenated number appears in the footer on each page. The first digit of
each page number indicates the part number, the second digit indicates the chapter
number within the part, and the final digit is the sequential page number within that
chapter. Page 1-2-1, for example, indicates that this is the first page in the second chapter
of part 1.
Manual name
The name of the manual that appears on the cover is also shown in the footer on each
page.
Edition number
The edition number is updated each time the manual is revised, with the number
reflecting the scale of changes that were made.
Minor revision: Minor changes are reflected in the part of the edition number after
the decimal point, for example, a change from edition 1.0 to 1.1. This
change is made on the revised pages only, and these pages can be
downloaded as required from Fuji's website.
Major revision: If major changes are made, the edition number is increased by one,
for example, a change from edition 1.0 to 2.0. This change is made on
all pages, including the cover.
Notation Conventions Used in this Manual
The notation conventions employed in this manual are described below.
[Production] command The names of the command buttons are enclosed in
brackets, and use the verb “press”.
START button Buttons on the machine are written exactly as they
appear, and use the verb “press”.
“Production” command section The names of commands that have been grouped
together are enclosed in quotation marks.
[TAB] key Keys on the keyboard appear in brackets.
About this Manual
Edition 1.1 iii CP643E System Reference
Terminology Notice
“Production Program” In this manual the term “production program” is
used to refer to the operating instructions used by the
machine in the production of a board.
In FujiCam, Fuji’s latest host system, this data is
referred to as the “recipe”.
Despite the differences in name, the terms carry the
same meaning, and references to “production
program” may therefore be thought of as “recipe” by
FujiCam users.
“Board”, “Block” In this manual the term “board” is used to refer to
the printed circuit on which parts are placed, and the
term “block” is used for multiple identical circuits
that may exist within a board and which are split into
individual units when production is complete.
In FujiCam, Fuji’s latest host system, these terms are
referred to as “panel” and “board” respectively.
Despite the differences in name, the terms used in
this manual carry the same meaning as the
corresponding FujiCam terminology and can
therefore be freely interchanged by FujiCam users.
About this Manual
Edition 1.1 iv CP643E System Reference