CP643 系统参考.pdf - 第192页
MODE 1 / MODE 2 / MODE 3 451-1/2/3-0 Command Pass: [PROGRAM] - [DEVICE] - [CHECK] - [MODE 1 / 2 / 3] Press to select device check mode. MODE 1: Press to display 10 consecutive devices regardless of whether each device is…
-PAGE 441-2-0
Command Pass: [PROGRAM] - [SKIP] - [BLOCK] - [-PAGE]
Press to display the previous page if a program contains more than 40 blocks.
Revision History
DEVICE 450-0-0
Command Pass: [PROGRAM] - [DEVICE]
Press to make device related settings.
Revision History
CHECK 451-0-0
Command Pass: [PROGRAM] - [DEVICE] - [CHECK]
Press to perform device check for the parts mounted on the device table for the current production
program.
Caution: On machines equipped with a handy terminal, device check instructions are sent to the handy
terminal using the [CHECK] command.
Device check cannot be performed on the machine. The message “Checking Devices by HT” will
display on the handy terminal during device check. The [CHECK] key is disabled during device
check using the handy terminal. In any case this page can be exited using [RETURN].
Select the device check mode.
Revision History
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-31 CP643E System Reference
MODE 1 / MODE 2 / MODE 3 451-1/2/3-0
Command Pass: [PROGRAM] - [DEVICE] - [CHECK] - [MODE 1 / 2 / 3]
Press to select device check mode.
MODE 1: Press to display 10 consecutive devices regardless of whether each device is used or not.
MODE 2: Press to display only those devices that are to be used.
MODE 3: Press to display only those among the devices being used that have a condition such as
"Un Set", "Parts E", "Pickup", or "Vision".
First Display Area
The display will appear in accordance with the selected mode.
D001 Un Set [0013] Device_comment_No_1
D002 Parts E [0008] Korewa_No_2_Desu
D003 [0002] PCPR102TL
D004 [0000]
D005 Vision [0001] MSD2HD256
D006 Tape E [0005] Micro_Tr_No1
D007 Next_d [0007] Super_Mini_Tr
↑↑ ↑ ↑
(a) (b) (c) (d)
(a) : Device number
(b) : Parts status
Un Set (yellow display) : Parts not yet checked
Blank (green display) : Parts set
(blue display) : Device previously used is not to be used this time.
Next D (highlighted in blue) : Set as next device but not checked
Tape E (white display) : End of tape detected
Parts E (red display) : Out of parts
Pickup (highlighted in yellow) : Parts incorrectly picked up
Vision (purple) : Vision processing error
(c) : Number of parts per board
(d) : Device comment
Revision History
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-32 CP643E System Reference
+PAGE 451-1/2/3-1
Command Pass: [PROGRAM] - [DEVICE] - [CHECK] - [MODE 1 / 2 / 3] - [+PAGE]
Press to display the next page.
Revision History
-PAGE 451-1/2/3-2
Command Pass: [PROGRAM] - [DEVICE] - [CHECK] - [MODE 1 / 2 / 3] - [-PAGE]
Press to display the previous page.
Revision History
▲ 451-1/2/3-3
Command Pass: [PROGRAM] - [DEVICE] - [CHECK] - [MODE 1 / 2 / 3] - [▲]
Press to move the cursor up one line.
Revision History
▼ 451-1/2/3-4
Command Pass: [PROGRAM] - [DEVICE] - [CHECK] - [MODE 1 / 2 / 3] - [▼]
Press to move the cursor down one line.
Revision History
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-33 CP643E System Reference