CP643 系统参考.pdf - 第322页

625: Wide Camera Center A2 Y 0 ~ 30000000 ✩ * ⇓ 644: Wide Camera Center T2 Y 0 ~ 30000000 ✩ * These items represent the Y-coordinates for the center of rotation of the No.2 nozzles on head A through T respectively when n…

562: Narrow Camera Rotation -19660800 ~ 19660800 ✩*

This sets the orientation of the narrow view parts camera. The value that displays here must

be divided by a factor of 65536 to obtain a value expressed in units of 0.001°. The user

cannot change this setting.

Default is the Proper data measurement result, which upon measurement must be

transmitted from the machine to the host computer.

563: Narrow Camera Gain 0 ~ 255 ✩*

This sets the gain level for the narrow view parts camera. It should not be necessary for the

user to change this setting.

The gain level that has been set for the narrow view camera must be transmitted from the

machine to the host computer.

564: Narrow Camera Offset 0 ~ 255 ✩*

This sets the offset level for the narrow view parts camera. It should not be necessary for

the user to change this setting.

The offset level that has been set for the narrow view camera must be transmitted from the

machine to the host computer.

565: Wide Camera Center A1 X 0 ~ 30000000 ✩*

⇓

584: Wide Camera Center T1 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.1 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

585: Wide Camera Center A1 Y 0 ~ 30000000 ✩*

⇓

604: Wide Camera Center T1 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.1 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

605: Wide Camera Center A2 X 0 ~ 30000000 ✩*

⇓

624: Wide Camera Center T2 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.2 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

Part 4 Chapter 2 Details of Proper Data

Edition 1.1 4-2-22 CP643E System Reference

625: Wide Camera Center A2 Y 0 ~ 30000000 ✩*

⇓

644: Wide Camera Center T2 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.2 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

645: Wide Camera Center A3 X 0 ~ 30000000 ✩*

⇓

664: Wide Camera Center T3 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.3 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

665: Wide Camera Center A3 Y 0 ~ 30000000 ✩*

⇓

684: Wide Camera Center T3 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.3 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

685: Wide Camera Center A4 X 0 ~ 30000000 ✩*

⇓

704: Wide Camera Center T4 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.4 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

705: Wide Camera Center A4 Y 0 ~ 30000000 ✩*

⇓

724: Wide Camera Center T4 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.4 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

Part 4 Chapter 2 Details of Proper Data

Edition 1.1 4-2-23 CP643E System Reference

725: Wide Camera Center A5 X 0 ~ 30000000 ✩*

⇓

744: Wide Camera Center T5 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.5 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

745: Wide Camera Center A5 Y 0 ~ 30000000 ✩*

⇓

764: Wide Camera Center T5 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.5 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

765: Wide Camera Center A6 X 0 ~ 30000000 ✩*

⇓

784: Wide Camera Center T6 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.6 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

785: Wide Camera Center A6 Y 0 ~ 30000000 ✩*

⇓

804: Wide Camera Center T6 Y 0 ~ 30000000 ✩*

These items represent the Y-coordinates for the center of rotation of the No.6 nozzles on

head A through T respectively when nozzle center measurement is carried out on the wide

view parts camera. The value that displays here must be divided by a factor of 65536 to

obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

805: Narrow Camera Center A1 X 0 ~ 30000000 ✩*

⇓

824: Narrow Camera Center T1 X 0 ~ 30000000 ✩*

These items represent the X-coordinates for the center of rotation of the No.1 nozzles on

head A through T respectively when nozzle center measurement is carried out on the

narrow view parts camera. The value that displays here must be divided by a factor of

65536 to obtain a value expressed in mm units.

These default values are based on the results of nozzle center measurement and must be

transmitted from the machine to the host computer after being measured.

Part 4 Chapter 2 Details of Proper Data

Edition 1.1 4-2-24 CP643E System Reference