CP643 系统参考.pdf - 第191页
-P AGE 441-2-0 Command Pass: [PROGRAM] - [SKIP] - [BLOCK] - [-PAGE] Press to display the previous page if a program contains more than 40 blocks. Revision History DEVICE 450-0-0 Command Pass: [PROGRAM] - [DEVICE] Press t…
SKIP 440-0-0
Command Pass: [PROGRAM] - [SKIP]
Press to set the block skip function.
Revision History
BLOCK 441-0-0
Command Pass: [PROGRAM] - [SKIP] - [BLOCK]
Press to set or clear the block skip setting.
First Display Area
"P" indicates block for normal production and "S" indicates block to be skipped.
Blocks displayed in red have been set in program to be skipped.
Input the number of the block to be skipped by using numerical keypad.
If the block was set to be produced, it will now be skipped, and vice versa.
Caution: A block skip set in program can only be cleared by changing the program and retransmitting it to the
machine.
Revision History
+PAGE 441-1-0
Command Pass: [PROGRAM] - [SKIP] - [BLOCK] - [+PAGE]
Press to display the next page if a program contains more than 40 blocks.
Revision History
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-30 CP643E System Reference
-PAGE 441-2-0
Command Pass: [PROGRAM] - [SKIP] - [BLOCK] - [-PAGE]
Press to display the previous page if a program contains more than 40 blocks.
Revision History
DEVICE 450-0-0
Command Pass: [PROGRAM] - [DEVICE]
Press to make device related settings.
Revision History
CHECK 451-0-0
Command Pass: [PROGRAM] - [DEVICE] - [CHECK]
Press to perform device check for the parts mounted on the device table for the current production
program.
Caution: On machines equipped with a handy terminal, device check instructions are sent to the handy
terminal using the [CHECK] command.
Device check cannot be performed on the machine. The message “Checking Devices by HT” will
display on the handy terminal during device check. The [CHECK] key is disabled during device
check using the handy terminal. In any case this page can be exited using [RETURN].
Select the device check mode.
Revision History
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-31 CP643E System Reference
MODE 1 / MODE 2 / MODE 3 451-1/2/3-0
Command Pass: [PROGRAM] - [DEVICE] - [CHECK] - [MODE 1 / 2 / 3]
Press to select device check mode.
MODE 1: Press to display 10 consecutive devices regardless of whether each device is used or not.
MODE 2: Press to display only those devices that are to be used.
MODE 3: Press to display only those among the devices being used that have a condition such as
"Un Set", "Parts E", "Pickup", or "Vision".
First Display Area
The display will appear in accordance with the selected mode.
D001 Un Set [0013] Device_comment_No_1
D002 Parts E [0008] Korewa_No_2_Desu
D003 [0002] PCPR102TL
D004 [0000]
D005 Vision [0001] MSD2HD256
D006 Tape E [0005] Micro_Tr_No1
D007 Next_d [0007] Super_Mini_Tr
↑↑ ↑ ↑
(a) (b) (c) (d)
(a) : Device number
(b) : Parts status
Un Set (yellow display) : Parts not yet checked
Blank (green display) : Parts set
(blue display) : Device previously used is not to be used this time.
Next D (highlighted in blue) : Set as next device but not checked
Tape E (white display) : End of tape detected
Parts E (red display) : Out of parts
Pickup (highlighted in yellow) : Parts incorrectly picked up
Vision (purple) : Vision processing error
(c) : Number of parts per board
(d) : Device comment
Revision History
Part 3 Chapter 3 Command Descriptions
Edition 1.0 3-3-32 CP643E System Reference