CP643 系统参考.pdf - 第44页
1.3.2 First Display Area The display on the monitor differs depending on whether or not the user is in automatic operation mode. (1) Display During Automatic Operation Mode Area A: This area displays sequence information…
H: Second Display Area
This area displays error messages and comments to the operator. Details regarding the
information displayed in this area are presented in “1.3.3 Second Display Area”.
I: Second Status Area
This area displays additional comments that supplement the information displayed in
the First Status Area. Input from the numerical keypad is also displayed here.
J: Program counter
This counter is referred to when an abnormality occurs in operation of the CP-643E. This
counter is not referred to during normal operation.
K: Inching axes
This display indicates which axes are currently selected for inching.
L: Command page
The function key command page number is displayed here.
M: Function key menu
Each function key corresponds to a command in the function key menu portion of the
CP-643E display.
Part 1 Chapter 1 Machine Overview
Edition 1.1 1-1-17 CP643E System Reference
1.3.2 First Display Area
The display on the monitor differs depending on whether or
not the user is in automatic operation mode.
(1) Display During Automatic Operation Mode
Area A: This area displays sequence information.
The following examples show how the First Display Area might appear.
Caution: The number of the next device from which parts were picked displays in the case that the
target device was part of a next device loop. In Changeover or Device Change mode,
when Device Table 2 (71-140: 51 ~ 100 for the CP-643ME) is the original table, the
device positions will be displayed as 71 ~ 140 (CP-643ME: 51 ~ 100) .
Display
ST11.N
ST11.N Skip
ST11.N
ST11.N
Meaning
This is the placing number at station 11. The device
number is also displayed.
In this sequence this nozzle is being skipped.
Fiducial marks are being read.
Block skip marks are being read.
CP643S1020
1D 35
D Er
1 Fidu
1 Blok
ST11. N
Ending one board production
NEXT PROD: TEST PROGRAM 1
CP643S1019
1D 35
STATUS
P Mode
Recovery
T Mode
: Product
: 3 times
: Joint
AB
C
D
CP643S1018
Part 1 Chapter 1 Machine Overview
Edition 1.1 1-1-18 CP643E System Reference
Area B: The operation modes are displayed here.
• P Mode: This item indicates whether the machine is currently in Product, Simulate, or
Idle or Idle 2 operation mode.
• Recovery: This item indicates which of the three recovery modes (E Pass, E Stop, or N
times) the machine is currently using.
• T Mode: This item indicates which of the device table modes are in operation.
When original table is designated, the sign " ** " will appear on its side.
Display
Joint
2A 1A **
2B 1A **
(2A1B)
Meaning
Joint Mode: The two tables move synchronously.
Device Change Mode: One device table is used as the spare
table for the other table.
Changeover Mode: Only one table operates and each table
operates for a separate program.
CP643S1023
Display
Times
Error Stop
Error Pass
Meaning
The number of times that recovery is repeated can be set.
Refer to Part 3, Chapter 3, "Command Descriptions" for
a more detailed explanation.
When an error occurs, the machine stops and recovery is
carried out when the machine is started again.
When an error occurs, the machine does not stop and no
recovery is carried out.
CP643S1022
Display
Product
Simulate
Idle
Idle 2
Meaning
The machine is in normal production mode.
The machine carries out a simulation of normal production.
Boards are loaded, and only the X-, Y-, D1- and D2-axes move
as they do during production for the selected production program.
The machine does not feed boards or perform vision
processing. Otherwise, it is the same as Product mode.
While in this mode there should be no parts on the device table.
In addition to the idling operation, in-/out-carrier operation and
board transfer actions between the XY-table and the carriers are
performed. (Actual board exchanges do not occur.)
When in this mode, there should be no parts on the device table.
CP643S1021
Part 1 Chapter 1 Machine Overview
Edition 1.1 1-1-19 CP643E System Reference