CP643 系统参考.pdf - 第317页

163: Reach Pulse D2 0 ~ 65535 [pulse] ✩ * This exactly aligns the D2-axis servo. If this value is changed the machine will not operate normally, so exercise extreme caution. Default: 15 164: Reach Pulse NC 0 ~ 65535 [pul…

100%1 / 388
153: Place Offset Y 80 -1000 ~ 1000 [0.001 mm] ✩*
Specify the placing offset for the Y-axis at a cam speed of 80 %. Note that changes made to
this item will influence the placing accuracy.
Default: Depends on the machine type.
154: Place Offset Y 70 -1000 ~ 1000 [0.001 mm] ✩*
Specify the placing offset for the Y-axis at a cam speed of 70 %. Note that changes made to
this item will influence the placing accuracy.
Default: Depends on the machine type.
155: Place Offset Y 60 -1000 ~ 1000 [0.001 mm] ✩*
Specify the placing offset for the Y-axis at a cam speed of 60 %. Note that changes made to
this item will influence the placing accuracy.
Default: Depends on the machine type.
156: Reach Pulse C 0 ~ 65535 [pulse] ✩*
This exactly aligns the C-axis servo.
If this value is changed the machine will not operate normally, so exercise extreme caution.
Default: 3
157: Reach Pulse FRQ 0 ~ 65535 [pulse] ✩*
This exactly aligns the FRQ-axis servo.
If this value is changed the machine will not operate normally, so exercise extreme caution.
Default: 8
158: Reach Pulse FQ 0 ~ 65535 [pulse] ✩*
This exactly aligns the FQ-axis servo.
If this value is changed the machine will not operate normally, so exercise extreme caution.
Default: 8
159: Reach Pulse X 0 ~ 65535 [pulse] ✩*
This exactly aligns the X-axis servo.
If this value is changed the machine will not operate normally, so exercise extreme caution.
Default: 3
160: Reach Pulse Y 0 ~ 65535 [pulse] ✩*
This exactly aligns the Y-axis servo.
If this value is changed the machine will not operate normally, so exercise extreme caution.
Default: 3
161: Reach Pulse Z 0 ~ 65535 [pulse] ✩*
This exactly aligns the Z-axis servo.
If this value is changed the machine will not operate normally, so exercise extreme caution.
Default: 50
162: Reach Pulse D1 0 ~ 65535 [pulse] ✩*
This exactly aligns the D1-axis servo.
If this value is changed the machine will not operate normally, so exercise extreme caution.
Default: 15
Part 4 Chapter 2 Details of Proper Data
Edition 1.1 4-2-17 CP643E System Reference
163: Reach Pulse D2 0 ~ 65535 [pulse] ✩*
This exactly aligns the D2-axis servo.
If this value is changed the machine will not operate normally, so exercise extreme caution.
Default: 15
164: Reach Pulse NC 0 ~ 65535 [pulse] ✩*
This exactly aligns the D2-axis servo.
If this value is changed the machine will not operate normally, so exercise extreme caution.
Default: 10
165: Spare data -1000 -1000 $*
This data item is not currently used.
166: A1 Place Offset X -327.68 ~ 327.67 [mm] ✩*
⇓
185: T1 Place Offset X -327.68 ~ 327.67 [mm] ✩*
This sets the amount of X direction offset for the No.1 nozzle position at station 11.
If this value is changed the machine will not place parts accurately.
Default is the Proper data calibration result.
186: A2 Place Offset X -327.68 ~ 327.67 [mm] ✩*
⇓
205: T2 Place Offset X -327.68 ~ 327.67 [mm] ✩*
This sets the amount of X direction offset for the No.2 nozzle position at station 11.
If this value is changed the machine will not place parts accurately.
Default is the Proper data calibration result.
206: A3 Place Offset X -327.68 ~ 327.67 [mm] ✩*
⇓
225: T3 Place Offset X -327.68 ~ 327.67 [mm] ✩*
This sets the amount of X direction offset for the No.3 nozzle position at station 11.
If this value is changed the machine will not place parts accurately.
Default is the Proper data calibration result.
226: A4 Place Offset X -327.68 ~ 327.67 [mm] ✩*
⇓
245: T4 Place Offset X -327.68 ~ 327.67 [mm] ✩*
This sets the amount of X direction offset for the No.4 nozzle position at station 11.
If this value is changed the machine will not place parts accurately.
Default is the Proper data calibration result.
246: A5 Place Offset X -327.68 ~ 327.67 [mm] ✩*
⇓
265: T5 Place Offset X -327.68 ~ 327.67 [mm] ✩*
This sets the amount of X direction offset for the No.3 nozzle position at station 11.
If this value is changed the machine will not place parts accurately.
Default is the Proper data calibration result.
Part 4 Chapter 2 Details of Proper Data
Edition 1.1 4-2-18 CP643E System Reference
266: A6 Place Offset X -327.68 ~ 327.67 [mm] ✩*
⇓
285: T6 Place Offset X -327.68 ~ 327.67 [mm] ✩*
This sets the amount of X direction offset for the No.3 nozzle position at station 11.
If this value is changed the machine will not place parts accurately.
Default is the Proper data calibration result.
286: A1 Place Offset Y -327.68 ~ 327.67 [mm] ✩*
⇓
305: T1 Place Offset Y -327.68 ~ 327.67 [mm] ✩*
This sets the amount of Y direction offset for the No.1 nozzle position at station 11.
If this value is changed the machine will not place parts accurately.
Default is the Proper data calibration result.
306: A2 Place Offset Y -327.68 ~ 327.67 [mm] ✩*
⇓
325: T2 Place Offset Y -327.68 ~ 327.67 [mm] ✩*
This sets the amount of Y direction offset for the No.2 nozzle position at station 11.
If this value is changed the machine will not place parts accurately.
Default is the Proper data calibration result.
326: A3 Place Offset Y -327.68 ~ 327.67 [mm] ✩*
⇓
345: T3 Place Offset Y -327.68 ~ 327.67 [mm] ✩*
This sets the amount of Y direction offset for the No.3 nozzle position at station 11.
If this value is changed the machine will not place parts accurately.
Default is the Proper data calibration result.
346: A4 Place Offset Y -327.68 ~ 327.67 [mm] ✩*
⇓
365: T4 Place Offset Y -327.68 ~ 327.67 [mm] ✩*
This sets the amount of Y direction offset for the No.4 nozzle position at station 11.
If this value is changed the machine will not place parts accurately.
Default is the Proper data calibration result.
366: A5 Place Offset Y -327.68 ~ 327.67 [mm] ✩*
⇓
385: T5 Place Offset Y -327.68 ~ 327.67 [mm] ✩*
This sets the amount of Y direction offset for the No.5 nozzle position at station 11.
If this value is changed the machine will not place parts accurately.
Default is the Proper data calibration result.
386: A6 Place Offset Y -327.68 ~ 327.67 [mm] ✩*
⇓
405: T6 Place Offset Y -327.68 ~ 327.67 [mm] ✩*
This sets the amount of Y direction offset for the No.6 nozzle position at station 11.
If this value is changed the machine will not place parts accurately.
Default is the Proper data calibration result.
Part 4 Chapter 2 Details of Proper Data
Edition 1.1 4-2-19 CP643E System Reference