CP643 系统参考.pdf - 第315页

145: Nozzle Check SW Yes: No # This sets whether or not there will be a mandatory nozzle check when the machine enters automatic operation. Yes: Mandatory nozzle check No: No mandatory nozzle check Default: "Yes” 14…

132: Spare data -1000 -1000 $*

This data item is not currently used.

133: Spare data -1000 -1000 $*

This data item is not currently used.

134: Spare data -1000 -1000 $*

This data item is not currently used.

135: Spare data -1000 -1000 $*

This data item is not currently used.

136: Spare data -1000 -1000 $*

This data item is not currently used.

137: PCB DISTANCE Check SW Yes : No #

This specifies whether a PCB distance check is carried out when automatic operation is

entered.

Yes : Check is carried out

No : Check is not carried out

Default: “Yes”

138: Skip Number 0 ~ 16 #

This sets the number of nozzle errors (for a specific nozzle) tolerated before that nozzle is

skipped.

Default: 0

139: Skip Nozzle 1: 0 ~ 12 #

This sets a limit on the number of No.1 nozzles which can be skipped.

Default: 0

140 Skip Nozzle 2: 0 ~ 12 #

This sets a limit on the number of No.2 nozzles which can be skipped.

Default: 0

141: Skip Nozzle 3: 0 ~ 12 #

This sets a limit on the number of No.3 nozzles which can be skipped.

Default: 0

142: Skip Nozzle 4: 0 ~ 12 #

This sets a limit on the number of No.4 nozzles which can be skipped.

Default: 0

143: Skip Nozzle 5: 0 ~ 12 #

This sets a limit on the number of No.5 nozzles which can be skipped.

Default: 0

144: Skip Nozzle 6: 0 ~ 12 #

This sets a limit on the number of No.6 nozzles which can be skipped.

Default: 0

Part 4 Chapter 2 Details of Proper Data

Edition 1.1 4-2-15 CP643E System Reference

145: Nozzle Check SW Yes: No #

This sets whether or not there will be a mandatory nozzle check when the machine enters

automatic operation.

Yes: Mandatory nozzle check

No: No mandatory nozzle check

Default: "Yes”

146 Narrow View Camera Non: Use *

This sets whether or not a camera with a narrow field of vision will be used.

Non: Not used

Use: Used

Default: "Use”

147: Front Light Non: Use *

This is set depending on whether or not the optional front light system is operational.

Non: Not in use

Use: Used

Default: "Non”

148: Cam Speed 0 ~ 100.0 [0.1%] #

This sets the speed of the cam axis in percentage terms (units of 0.1%).

Default: 100.0

149: M/C PCB TYPE 0 ~ 1 #

Machines compatible with 2-PCB production are set as “0” (standard).

Machines that are compatible with production of only one PCB are set as “1” (currently not

supported).

Default: “0”

150: D ESC sw No : Yes #

Specify the position the device table moves to for the replenishment of parts, irrespective of

the device table mode. An exception is made when in device change mode, if the recovery

mode is ‘error stop’ or the recovery limit is reached for a reason other than what is specified

at “78. D Change Trigger”.

Yes: The device table at which the error occurred moves to its retract position and waits

for the operator to carry out a device check.

No: Facing the machine from the front, device table one moves to the right and device

table two moves to the left the amount appropriate for that machine type.

Movement amounts

CP-6/642: 45 devices positions

CP-6M: device table one (687 mm), device table two (678 mm)

CP-65, 50: device positions

Default: "No”

151: Place Offset Y 100 -1000 ~ 1000 [0.001 mm] ✩*

Specify the placing offset for the Y-axis at a cam speed of 100 %. Note that changes made to

this item will influence the placing accuracy.

Default: Depends on the machine type.

152: Place Offset Y 90 -1000 ~ 1000 [0.001 mm] ✩*

Specify the placing offset for the Y-axis at a cam speed of 90 %. Note that changes made to

this item will influence the placing accuracy.

Default: Depends on the machine type.

Part 4 Chapter 2 Details of Proper Data

Edition 1.1 4-2-16 CP643E System Reference

153: Place Offset Y 80 -1000 ~ 1000 [0.001 mm] ✩*

Specify the placing offset for the Y-axis at a cam speed of 80 %. Note that changes made to

this item will influence the placing accuracy.

Default: Depends on the machine type.

154: Place Offset Y 70 -1000 ~ 1000 [0.001 mm] ✩*

Specify the placing offset for the Y-axis at a cam speed of 70 %. Note that changes made to

this item will influence the placing accuracy.

Default: Depends on the machine type.

155: Place Offset Y 60 -1000 ~ 1000 [0.001 mm] ✩*

Specify the placing offset for the Y-axis at a cam speed of 60 %. Note that changes made to

this item will influence the placing accuracy.

Default: Depends on the machine type.

156: Reach Pulse C 0 ~ 65535 [pulse] ✩*

This exactly aligns the C-axis servo.