YV180X_Ope_E.pdf - 第15页
1 -5 EPD8013110 Operation Chapter 1 1 Par t names and functions YV180X head assembly with FNC (option) 23102-D8-00 2 4 6 Head 1 7 3 5 Head 8 Heads 2, 4, 6, 8 = FNC
1
-4
EPD8013110
Operation
Chapter 1
1
Part names and functions
2. Head assembly
The head assemblies of the YV180X are mounted on the front and rear of
the X arm. When viewed from the front of the machine, the front is called
the A-table head assembly, and the rear the B-table head assembly.
2.1 Component pickup/mount head
Each head assembly of the YV180X has 8 in-line heads (nozzles). Head
numbers are designated from 1 to 8, from the right as viewed from the
front of each head assembly. The spacing of adjacent nozzles attached to
the head assembly is 16mm, which is identical to the pitch of the feeder
installation holes on the feeder plates.
Optional flying nozzle change (FNC) functions can be installed to Heads 2,
4, 6 and 8. The FNC functions allow exchanging the nozzle at high speeds
while the head assembly is moving to a component feeder.
YV180X head assembly (standard head)
23101-D8-00
. . . . Head 1Head 8 . . .
1
-5
EPD8013110
Operation
Chapter 1
1
Part names and functions
YV180X head assembly with FNC (option)
23102-D8-00
2 4 6
Head 17 35
Head 8
Heads 2, 4, 6, 8 = FNC
1
-6
EPD8013110
Operation
Chapter 1
1
Part names and functions
2.2 Nozzle types
To ensure stable component pickup, the correct nozzle that matches the
component must be used. The table below shows typical nozzles which can
be attached to each head.
Reference
To check the component types that can be picked up by each nozzle, refer to “Nozzle
table” listed in the supplement at the end of this manual.
On the standard YV180X, five types of nozzles (Types 71A to 74A and
76A) can be chosen and attached to all heads (Heads 1 to 8).
On the YV180X head assembly with optional FNC (flying nozzle change)
functions, Heads 2, 4, 6 and 8 accept FNC nozzles (Types 71F, 72F, 73F)
for flying nozzle change.
Nozzle types for YV180X
25101-D8-00
Nozzle Type
Head No.
Standard
Head Assembly
Typical Components
Type 71A
Type 71F
(FNC)
Type 72A
Type 72F
(FNC)
Type 73A
Type 73F
(FNC)
Type 74A
Type 76A
1005 size chip components, etc.
1608 to 3216 size components,
mini-mold transistors, etc.
3245 to 7353 size components,
5 to 15mm SOP, etc.
15 to 20mm SOP,
10×10 to 25×25mm QFP, BGA, etc.
Melf component
(cylindrical chip) only
1 to 8
-
1 to 8
-
1 to 8
-
1 to 8
1 to 8
1, 3, 5, 7
2, 4, 6, 8
1, 3, 5, 7
2, 4, 6, 8
1, 3, 5, 7
2, 4, 6, 8
1, 3, 5, 7
2, 4, 6, 8
FNC Head
Assembly