YV180X_Ope_E.pdf - 第19页

1 -9 EPD8013110 Operation Chapter 1 1 Par t names and functions 3. Feeder plate T ape feeders, bulk feeders and stick feeders (multi-stick feeders) are installed on the front and rear feeder plates of the machine. These …

100%1 / 307
1
-8
EPD8013110
Operation
Chapter 1
1
Part names and functions
Type F nozzles (Flying nozzles)
Heads 2, 4, 6 and 8 of FNC head assemblies have a flying nozzle changer
that performs automatic nozzle change at high speeds. Type F nozzles
(Types 71F, 72F and 73F) are specifically used with this flying nozzle
changer.
Flying nozzle changer (viewed from the gear side)
28102-D8-00
FNC nozzles
23103-D8-00
Type 72F
Type 73F
Type 71F
2
1
3
1 to 3 : Index holder No.
Index holder No.
1
2
3
Standard nozzles
attached to FNC head
Type 71F
Type 72F
Type 73F
1
-9
EPD8013110
Operation
Chapter 1
1
Part names and functions
3. Feeder plate
Tape feeders, bulk feeders and stick feeders (multi-stick feeders) are
installed on the front and rear feeder plates of the machine. These feeders
pneumatically operate by air supplied from the mounter to feed each
component to the pickup position.
The YV180X feeder plate is separated into 4 plates. Two each are installed
on the A-table and B-table sides. Each feeder set position is designated by
a “feeder set number” as shown below.
Feeder plate
23104-D8-00
Feeder drive air outlet
Power supply connector for multi-stick
feeder and dump station
Tape feeder
Feeder plat
e
Feeder set number on standard machine (top view)
23105-D8-00
140
109 108 101
18
9
40
Multi-vision camera
Multi-vision camera
B table
A table
1
-10
EPD8013110
Operation
Chapter 1
1
Part names and functions
3.1 Head movement range (accessible
feeders)
Some feeders cannot be reached by a head depending on the head assembly
configuration and X-axis movement range. The table below shows feeder
numbers that can be accessed by each head when 8mm tape feeders are
installed on the feeder plate.
Accessible feeders (standard machine)
25102-D8-00
Head No.
1
2
3
4
5
6
7
8
Accessible feeder No. (front)
7 to 40
6 to 39
5 to 38
4 to 37
3 to 36
2 to 35
1 to 34
1 to 33
Accessible feeder No. (rear)
107 to 140
106 to 139
105 to 138
104 to 137
103 to 136
102 to 135
101 to 134
101 to 133
Reference
The number of accessible feeders depends on the machine specifications. If your machine
is custom-manufactured, see the spec sheet for your machine.