YV180X_Ope_E.pdf - 第215页
5 -139 EPD8013110 Operation Chapter 5 5 Creating the PCB data 11.2 Data backup Follow these steps to make a data backup. 1 Insert a PCB data disk into the floppy disk drive. 2 Run the <4/1/A1 SEARCH DRIVE> command.…
5
-138
EPD8013110
Operation
Chapter 5
5
Creating the PCB data
2. When the Format Floppy Disk dialogue box appears, use the [Space],
[INS] or [DEL] key to make a selection as follows.
Selectable disk type
25518-C0-00
2HD
2DD
1.44MB
720KB
Format Disk type
3. Press the [ENTER] key to start formatting.
After formatting, the disk is automatically created as a PCB data disk.
n
NOTE
If you do not want to perform disk formatting, press the [ESC] key or set “Select disk
type? in the Format Floppy Disk dialogue box to “CANCEL” and then press the [ENTER]
key.
For formatted disk.
1. When you inserted a formatted disk into the floppy disk drive in Step 1,
the following dialogue box appears, so use the [Space], [INS] or [DEL]
key to set to “Execute.”.
27563-C0-00
Create PCB Data Disk for VIOS
Please insert new floppy disk in disk drive
Create PCB data disk? : Execute
[INS] [DEL] to change. [ESC] to abort. [ENTER] to finish.
Press the [Space], [INS] or [DEL] key to make selection.
2. Press the [ENTER] key to start creating a PCB data disk.
5
-139
EPD8013110
Operation
Chapter 5
5
Creating the PCB data
11.2 Data backup
Follow these steps to make a data backup.
1 Insert a PCB data disk into the floppy disk drive.
2 Run the <4/1/A1 SEARCH DRIVE> command.
When this command runs, the PCB data registered in the hard disk is
displayed on the left screen, and the PCB data registered in the PCB data
disk on the right screen.
SEARCH DRIVE screen
27564-C0-00
<VIOS PCB> /Drv : C
Vios Pcb Name
STATIC_COMPONENTS_
CONVEYOR
ADJUST
Date
95-09-05
95-12-13
94-02-23
Time
07 : 58
17 : 08
10 : 01
<VIOS PCB> /Drv : C
Vios Pcb Name
Date Time
Hard disk in mounter
Floppy disk drive
3 Select the PCB data to be backed up.
Move the cursor to the PCB data to be backed up on the left screen. When
the [INS] key is pressed, that PCB data will be selected. Repeat this step for
all PCB data items to be backed up. To cancel the selection press the
[DEL] key. After selecting all required data items, press the [ESC] key to
display the command menu window, then select <4/1/B1 COPY PCB FILE>
and press the [ENTER] key.
4 Follow the messages to run the command.
Check the contents, and if they are okay, press the [Space] bar to set the
last item to “EXECUTE”, and then press the [ENTER] key. The data will be
copied onto the PCB data disk.
COPY PCB FILE screen
27565-C0-00
Copy PCB file
Source
Distination
Select Execute
Drive
Machine
PCB NAME
Drive
Machine
PCB NAME
: C
: Machine
: ADJUST
: A
: ___
: ADJUST
: CANCEL
NOT EXIT
Set this item to “EXECUTE”.
5
-140
EPD8013110
Operation
Chapter 5
5
Creating the PCB data
12. Teaching and trace
This section explains basic operations of trace and teaching often used
when creating or checking new PCB data.
12.1 Trace
The trace function allows a teaching unit such as camera or head to auto-
matically move to a specified position. This is mainly used to check the
settings for the XY coordinates. The steps below explain the procedure for
tracing in the DATA Manager.
1 Set trace conditions.
When you select <2/1/B0 TEACH, TRACE CONDITION> and press the
[ENTER] key (or press the [F10] key on a data edit screen), the trace/
teaching conditions setting boxes appear. Make settings referring to the
description below.
TEACH-TABLE SEL. (Teaching/trace table selection):
Use the up/down arrow keys to select the A table or B table to be used
for teaching or trace, and press the [ENTER] key.
TEACH-UNIT SEL. (Teaching/trace unit selection):
Use the up/down arrow keys to select the teaching/trace unit from
among “Head 1”, “Head 8“ or “Camera”, and press the [ENTER] key.
SPEED SELECT (Axis moving speed selection):
Use the up/down arrow keys to select the speed from among “Speed 1”
to “Speed 5”, and press the [ENTER] key.
FIDUCIAL SEL (Fiducial correction option):
Select whether or not to use fiducial correction and press the [ENTER]
key.
Select “Use” when you are going to create or edit PCB data using a
fiducial mark. The machine will automatically recognize the PCB
fiducial mark to obtain corrected data, enabling more accurate trace or
teaching of the position. Note that correct coordinates of the fiducial
mark must be specified in advance when using this function.
Reference
When the teach/trace conditions are set, they are displayed on the upper right of the
screen as shown below.