YV180X_Ope_E.pdf - 第29页

2 -4 EPD8013110 Operation Chapter 2 2 About VIOS 1.1 Basic operations The VIOS software runs from hierarchical menus comprised of APPLICA- TION, MODE, COMMAND LIST and COMMAND. T o start automatic operation, for example,…

-3

EPD8013110

Operation

Chapter 2

About VIOS

1. VIOS

The VIOS is the software specifically programmed to operate YAMAHA

surface mounters and related machines. The VIOS allows you to select the

target command, parameter or item you want to run, check or change the

data through an easy-to-use hierarchical structure divided into 4 application

managers as explained below.

1. OPERATION manager

The OPERATION manager deals with commands and data relating to

automatic operation and production history in routine PCB production.

2. DATA manager

The DATA manager allows you to create, edit and optimize data on

PCBs and components.

3. MAINTENANCE manager

The MAINTENANCE manager is used to handle commands for

maintenance such as machine data adjustment, repair and accuracy

improvement. For detailed information, refer to the mounter service

manual.

4. SHELL manager

The SHELL manager contains various utilities that enable you to

perform a variety of data maintenance tasks.

You can call up the on-line help message by pressing the [F1] key at any

hierarchical level. (See “1.3 Help function” in this chapter.) The illustration

below shows the VIOS software main menu.

VIOS main window

27201-C0-00

<<<APPLICATION>>> 1/OPERATION/M 2/DATA/M 3/MAINTE/M 4/SHELL/M 0/EXIT

DATA[non ]

RUNNING

PRD.DATA

PRD.HISTORY

MANUAL

:Production, Warming up

:PCB data modification

:Production history

:Manual operation

<<<OPERATION MANAGER>>>

supports daily production.

MODE

-4

EPD8013110

Operation

Chapter 2

About VIOS

1.1 Basic operations

The VIOS software runs from hierarchical menus comprised of APPLICA-

TION, MODE, COMMAND LIST and COMMAND. To start automatic

operation, for example, select <1/ OPERATION/M > - <1/RUNNING> -

<A/RUNNING> and <A2 AUTO RUNNING> as shown below.

Starting automatic operation

23201-C0-00

1/RUNNING

2/PRD.DATA

3/PRD.HISTORY

4/MANUAL

0/EXIT

A/RUNNING

B/CONDITION

C/MONITOR

D/INITIALIZE

E/SKIP&EXIT

A1 STOP RUNNING

A2 AUTO RUNNING

A3 STEP RUNNING

A4 A_TABLE ON/OFF

A5 B_TABLE ON/OFF

A6 PCB TBL ON/OFF

1/OPERATION/M

2/DATA/M

3/MAINTE/M

4/SHELL/M

0/EXIT

APPLICATION MODE COMMAND_LIST COMMAND

There are three methods for selecting each item.

1. Using the arrow keys and [ENTER] key

Use the arrow keys to move the cursor to the item (application, mode

or command) you want to select and press the [ENTER] key.

2. Using the number keys

Directly hit the number or alphabet key for the item you want to select.

For example, instead of executing the <1/1/A2 AUTO RUNNING>

command as explained above, hit the number key in order “1” (1/

OPERATION/M), “1” (1/RUNNING), alphabet key “A” and number

key “2” (A2 AUTO RUNNING).

3. Using function keys and YPU keys

Some commands can be directly executed by pressing the specified

function key. For example, you can directly execute the <B1 ADJUST

ASSISTANT [F6]> command by pressing the [F6] key.

The YPU keys can also be used to directly execute some special

commands by pressing the corresponding keys. (See “5. Data input and

operation devices” in Chapter 1.)

Reference

This manual shows hierarchical menu commands as in <1/1/A2 AUTO RUNNING> which

stands for <Application number/Mode number/Command name>.

-5

EPD8013110

Operation

Chapter 2

About VIOS

1.2 VIOS screen structure

The illustrations below show typical displays of the VIOS software screen.

Display in the RUNNING mode of the OPERATION Manager

27202-C0-00

<<<APPLICATION>>> 1/OPERATION/M 2/DATA/M 3/MAINTE/M 4/SHELL/M 0/EXIT

<<MODE>> 1/RUNNING 2/PRD.DATA 3/PRD.HISTORY 4/MANUAL 0/EXIT

<COMMAND_LIST> A/RUNNING B/CONDITION C/MONITOR D/INITIALIZE E/SKIP&EXIT

Condition

Waiting

Initialized

UseVacChk

UesAlign

Speed 100

D1 WARM UP

D2 INIT.SERVO ORIGIN

D4 ASSISTANT UTILITY

D5 STOPPING UTILITY

D6 RUNNING UTILITY

DATA [ CUK93001 ]

PCB name

Command list

Shows the command menu list available in the selected mode.

Mode

Shows the mode menu available in the selected application manager.

Application

Shows the four main application managers of the VIOS. Available managers

can be specified by password.

Command window

A pull-down submenu of

the selected command menu

Running monitor

Shows the operating status and machine

conditions.

Display in the EDIT_DATA mode of the DATA Manager

(Component information screen)

27203-C0-00

DATA [ CUK93001_00 ]

<<<APPLICATION>>>

<<MODE>> 1/EDIT_DATA

PCB : CUK93001

2/DATA/M

OBJ : Component Info.

No.

1.BASIC INFO.

Database No.

Comp. Package

Feeder Type

Required Nozzle

Feeder Set No.

Pos. Definition

Tray

Fix.TF

For QFP20mm73

Teaching

COMMENTCOMPONENT NAME

R1005

R2125

Main window

Allows registering basic data such as component name. Pressing the [TAB] key

switches the active screen between this main window and right-hand sub-window.

Sub window

Allows registering and editing various parameters. Pressing

the [TAB] key switches the active screen between this sub-window

and main window. The contents of the sub-window are switched by

pressin

the

[

]