YV180X_Ope_E.pdf - 第223页

5 -147 EPD8013110 Operation Chapter 5 5 Creating the PCB data 12.3 Automatic trace This function allows the head or camera to perform automatic trace. When used with the mount information, the successiv e mount points ca…

100%1 / 307
5
-146
EPD8013110
Operation
Chapter 5
5
Creating the PCB data
Reference
Two sets of coordinates are displayed during vision cursor teaching. The left-hand
coordinates indicate the position of the upper left corner of the teaching window, and the
right-hand coordinates indicate the position of lower right corner, both represented in
pixel units.
Teaching window position coordinates
23565-C0-00
∗(180, 170) - ∗(338, 331)
∗(180, 170) - ∗(338, 331)
B
B
A
A
5 Press the [F10] key to perform teaching.
The center coordinates of the teaching window have now been entered.
n
NOTE
Before performing vision cursor teaching, you must set teaching conditions. If you press
the [Ctrl]+[F10] keys without setting these conditions, the teaching window may not be
displayed.
5
-147
EPD8013110
Operation
Chapter 5
5
Creating the PCB data
12.3 Automatic trace
This function allows the head or camera to perform automatic trace. When
used with the mount information, the successive mount points can be
continuously traced, and when used with the component information, the
successive pickup points can be continuously traced .
1 Open the Mount Info. or Component Info. screen.
2 Set trace conditions.
See Step 1 in “12.1. Trace” in this chapter.
3 Clamp the PCB on the conveyor.
Use the <2/1/B7 CONVEYOR UNITS> utility to clamp the PCB on the
conveyor.
4 Move the cursor to the data line from which you want to
perform trace.
5 Check the surrounding area for safety.
The teaching unit will move immediately when automatic trace starts. Stay
outside of the axis movement range.
6 Press the [Ctrl] + [F9] keys to perform automatic trace.
Continuous trace proceeds until an empty line is reached. On the Mount
Info. screen, the cursor blinks in the No. column indicating which mount
point is currently traced. On the Component Information screen, the
cursor blinks in the COMMENT column indicating which pickup point is
currently traced.
Automatic trace
27567-C0-00
CAM 100% X1: 325.33 Y1: -204.13
OBJ :Mount Info.
No.
1
2
3
4
5
SignOfLandPattern
R1005
Comp
1
1
1
1
1
X
10.75
13.75
22.75
22.75
34.75
Y
8.00
9.50
11.00
8.00
8.00
R
0.00
180.00
0.00
0.00
0.00
Head
3
3
3
3
3
PCB :
FidMk
0
0
0
0
0
BadMk
0
0
0
0
0
Skip?
Exec
Exec
Exec
Exec
Exec
OBJ :Component Info.
No.
1
2
3
4
5
COMPONENT NAME
R1005
R1005
R1005
R1005
R1005
COMMENT
1.BASIC INFO.
Database No.
Comp. Package
Feeder Type
Required Nozzle
Feeder Set No.
Pos. Definition
PCB :
:
:
:
:
:
:
Tray
Fix. TF
ForQFP20mm73
Teaching
9
33
CAM 100% X1: 388.00 Y1: -204.13
Currently traced point
Mount Info. screen
Component Info. screen
n
NOTE
To interrupt automatic trace, press any key.
5
-148
EPD8013110
Operation
Chapter 5
5
Creating the PCB data
13. Data editing for production PCB
13.1 Data editing
On a data editing screen, you can copy or move the specified data to
another line, another PCB data, and a static component data file. When
adding or deleting the data, you can insert or delete one or more lines, or
one or more columns as necessary. In addition, it is possible to copy and
delete the data registered in the database.
13.1.1 Copying the specified range
You can copy a specified range of data on the database screen or any
editing screen except the PCB Info. screen. To perform a copy, first select
the range of copy source data, then specify the copy destination. You can
copy the selected range between different types of PCB data or into the
database (user’s area).
1 Designate the copy source.
1. Use the arrow keys to place the cursor on the first data line to be
copied.
2. Press the [ESC] key to exit the current editing screen, then select <2/1/
C4 SELECT DATA> (<2/3/C4> in DATABASE mode) and press the
[ENTER] key. The selected top line will be highlighted on the screen.
3. Use the arrow keys to move the cursor through the last data line to be
copied.
4. Press the [ENTER] key to select the range. The selected range high-
lighted will slightly change.
Selecting the range
27568-C0-00
<<<APPLICATION>>> 2/DATA/M
<<MODE>> 1/EDIT_DATA
PCB :
OBJ :Component Info.
No.
1
2
3
COMPONENT NAME
R1608
R2125
R3216
COMMENT
1.BASIC INFO.
Database No.
Comp. Package
Feeder Type
:
:
:
Tape
8mmTape
501
<<MODE>> 1/EDIT_DATA
PCB :
OBJ :Component Info.
No.
1
2
3
COMPONENT NAME
R1608
R2125
R3216
COMMENT
1.BASIC INFO.
Database No.
Comp. Package
Feeder Type
:
:
:
Tape
8mmTape
501
PCB :
OBJ :Component Info.
No.
1
2
3
COMPONENT NAME
R1608
R2125
R3216
COMMENT
1.BASIC INFO.
Database No.
Comp. Package
Feeder Type
:
:
:
Tape
8mmTape
501
C/EDIT_TOOL
C4 SELECT DATA
1
2
3
R1608
R2125
R3216
Tape
8mmTape
501
<COMMAND_LIST>
Substep 1
Substep 2
Substep 3