YV180X_Ope_E.pdf - 第81页
5 -5 EPD8013110 Operation Chapter 5 5 Creating the PCB data 2. Registering and selecting the PCB name Flow chart for registering and selecting PCB name 23503-C0-00 2/DATA/M 1/EDIT_DATA D1/SWITCH PCB DATA Select PCB name …
5
-4
EPD8013110
Operation
Chapter 5
5
Creating the PCB data
The flow chart below shows the basic procedure for creating new PCB
production data.
Flow chart for creating new PCB production data
23502-C0-00
Create Component Info.
Create PCB Info.
Create Mount Info.
Register and select
PCB names
Create database
Create Mark Info.
Create
Block Repeat Info.
Clamp PCB on conveyor
Create
Local Fidu. Info.
Create
Local Bad Mrk Info.
Check mounting position
and correct data
Data optimization
To PCB production
Test mount components
and correct the data
Make data backup
Chapter 6
☞
2
☞
3
☞
For fiducial mark
For badmark
4
☞
Chapter 6
☞
5
☞
6
☞
Chapter 6
☞
7
☞
Chapter 6
☞
Chapter 6
☞
8
☞
9
☞
10
☞
11
☞
Chapter 4
☞
Perform the shaded
items as needed.
5
-5
EPD8013110
Operation
Chapter 5
5
Creating the PCB data
2. Registering and selecting the PCB name
Flow chart for registering and selecting PCB name
23503-C0-00
2/DATA/M
1/EDIT_DATA
D1/SWITCH
PCB DATA
Select
PCB name
2/DATA/M
1/EDIT_DATA
D2/CREATE
PCB DATA
Input PCB name
D1/SWITCH
PCB DATA
Select
PCB name
To register a new PCB name
To select a PCB name
already registered
VIOS hierarchical structure (for registering and selecting PCB name)
23504-C0-00
1/OPERATION/M 2/DATA/M 3/MAINTE/M 4/SHELL/M 0/EXIT
1/EDIT_DATA
A/DISPLAY
D1 SWITCH PCB DATA
D2 CREATE PCB DATA
D3 DELETE PCB DATA
D4 COPY PCB DATA
D5
D6 RENAME & SAVE & EXIT
D7 CHECK DATA ROUGHLY
D8 SAVE PCB DATA
D9 ABORT PCB DATA
D0 SAVE PCB DATA & EXIT
B/UTILITY
C/EDIT_TOOL
D/FILE
2/DATA_GENERATOR
3/DATABASE 4/MANUAL 0/EXIT
5
-6
EPD8013110
Operation
Chapter 5
5
Creating the PCB data
2.1 Registering PCB names
To create new PCB data for production, you must first register the PCB
name. There are four methods for registering a PCB name.
1. Registering a new PCB name
If no basic data is found in the previously registered PCB data. You
should register a PCB name to create empty space for new PCB data
and then enter necessary data.
2. Utilizing PCB data already registered
Make a copy of PCB data which is already registered in the VIOS
software memory.
3. Converting PCB data created by a YAMAHA YM series
mounter (UFOS machine)
Convert the UFOS data into VIOS data.
4. Converting CAD data or other manufacturer’s mounter data
After converting CAD data or other manufacturer’s mounter data into a
typical format, take its component coordinate data into the VIOS to
create data that can be used with YAMAHA full vision series
mounters.