YV180X_Ope_E.pdf - 第234页
5 -158 EPD8013110 Operation Chapter 5 5 Creating the PCB data Retry T imes : Specify the Retry Times setting in the PICK&MOUNT INFO. sub-window of the component information. Use the [INS], [DEL] or [Space] key to mak…
5
-157
EPD8013110
Operation
Chapter 5
5
Creating the PCB data
Feeder Type : Select the Feeder Type setting in the BASIC
INFO.
sub-window of the component information.
Use the [INS], [DEL] or [Space] key to make
the selection.
Data Base No. : Select the Database No. setting in the BASIC
INFO. sub-window of the component
informatL/n. Use the number keys to make the
selection.
Comment : Select the COMMENT column setting in the
component information. Use the character
keys to make a selection.
2. When you have made necessary selections, press the [ENTER] key.
The editing cursor now moves down to the light blue column.
4 Set “Select change item”.
Press the [ENTER] key to move the cursor down to the lower items and
make changes as follows.
1. Use the up/down arrow keys to select the parameter (shown in red) you
want to change. Then, enter or select the new setting for the selected
parameter with the number keys, or [INS], [DEL] or [Space] key.
Setting for “Select change item” (Component Info.)
27576-C0-00
Select condition item
Component name
R1005
Select change item
Retry Times
2
Use arrow keys to
make selection
Use number keys, [INS] or
[DEL] key to make setting
Pick Angle Deg : Specify the Pick Angle deg setting in the
PICK&MOUNT INFO. sub-window
of the component information. Use the [INS],
[DEL] or [Space] key to make the setting.
Pick /Mount Timer : Specify the Pick Timer or Mount Timer setting
in the PICK&MOUNT INFO. sub-window of
the
component information. Use the [INS], [DEL]
or [Space] key to make the setting.
Pick /Mnt Height : Specify the Mount Height or Mnt Height
setting in the PICK&MOUNT INFO. sub-
window of the component information. Use
the number keys to make the setting.
Dump Way : Specify the Dump Way setting in the
PICK&MOUNT INFO. sub-window of the
component information. Use the [INS], [DEL]
or [Space] key to make the setting.
5
-158
EPD8013110
Operation
Chapter 5
5
Creating the PCB data
Retry Times : Specify the Retry Times setting in the
PICK&MOUNT INFO. sub-window of the
component information. Use the [INS], [DEL]
or [Space] key to make the setting.
Mount Action : Specify the Mount Action setting in the
PICK&MOUNT INFO. sub-window of the
component information. Use the [INS], [DEL]
or [Space] key to make the setting.
Mount/Pickup Speed: Specify the Mount Speed or Pickup Speed
setting in the PICK&MOUNT INFO. sub-
window of the component information. Use
the [INS], [DEL] or [Space] key to make the
setting.
Vacuum Check : Specify the Vacuum Check setting in the
PICK&MOUNT INFO. sub-window of the
component information. Use the [INS], [DEL]
or [Space] key to make the setting.
Pick/Mount Vacuum : Specify the Pick Vacuum or Mount Vacuum
setting in the PICK&MOUNT INFO. sub-
window of the component information. Use
the number keys to make the setting.
Pick/Mount Timer offset : Enter the desired offset to add to or
subtract from the current Pick Timer or
Mount Timer data in the PICK&MOUNT
INFO. sub-window of the component
information. Use the number keys to make
the setting.
Pick/Mount Height offset : Enter the desired offset to add to or
subtract from the current Pick Height or
Mount Height data in the PICK&MOUNT
INFO. sub-window of the component
information. Use the number keys to make
the setting.
Database No. : Specify the Database No. in the BASIC INFO.
sub-window. Use the number keys to make
the setting.
Nozzle Type : Specify the Required Nozzle in the BASIC
INFO.
sub-window. Use the [INS], [DEL] or [Space]
key to make the setting.
Feeder Type : Specify the Feeder Type in the BASIC INFO.
sub-window. Use the [INS], [DEL] or [Space]
key to make the setting.
Comment : Enter a comment for the component informa-
tion,
using the alphanumeric keys.
2. When all the necessary settings are complete, press the [ENTER] key to
perform replace.
5
-159
EPD8013110
Operation
Chapter 5
5
Creating the PCB data
13.3 Data sort
You can sort the mount data in ascending or descending order according to
the selected conditions.
1 Open the Mount Information screen.
2 Select the DATA SORT command.
1. Press the [ESC] key, select <2/1/C1 EDITOR ASSISTANT> and press the
[ENTER] key.
The EDITOR ASSISTANT submenu box appears.
2. Select “DATA SORT” and press the [ENTER] key.
The SORT ITEM box appears.
DATA SORT command
27577-C0-00
<COMMAND_LIST>
R1608
R2125
R3216
1
2
3
C/EDIT_TOOL
C1 EDITOR ASSISTANT
EDITOR ASSISTANT
DATA SORT
30
Exec
3 Specify the sorting conditions.
Here you must specify the sorting conditions (sorting items and their
priority). Numbers listed in the SORT ITEM box indicate the sorting
priority, with the highest priority at No.1 and the lowest at No. 9, so you
can specify up to 9 items.
1. Line up the cursor with No.1 in the SORT ITEM box.
2. Use the [INS], [DEL] or [Space] keys to select the sorting item.
3. Specify other sorting items as needed, by moving the cursor to No. 2
and then the subsequent numbers.
SORT ITEM box
27578-C0-00
SORT ITEM
1 Comp
2 SignOfLandPattern
3 Non
4 Non
5 Non
6 Non
7 Non
8 Non
Upper Dir
Execute
Use [INS], [DEL] or [Space]
keys to make selection
Use [INS] or [DEL] key
to make selection
Sorting priority
Press [ENTER] to execute
data sort