YV180X_Ope_E.pdf - 第18页

1 -8 EPD8013110 Operation Chapter 1 1 Par t names and functions T ype F nozzles (Flying nozzles) Heads 2, 4, 6 and 8 of FNC head assemblies ha ve a flying nozzle changer that performs automatic nozzle change at high spee…

100%1 / 307
1
-7
EPD8013110
Operation
Chapter 1
1
Part names and functions
Type A nozzles
Type A nozzles (Types 71A to 74A and 76A) can be attached to all heads
of standard 8 in-line head assemblies or Heads 1, 3, 5 and 7 of FNC head
assemblies.
To attach a Type A nozzle, insert the nozzle between the nozzle holder leaf
springs while aligning the nozzle grip piece with the leaf springs. To
remove the nozzle from the nozzle holder, gently pull it downwards.
Standard Type A nozzles
30042016-00
Type 76AType 74AType 73AType 72AType 71A
Attaching/detaching Type A nozzle
30042012-A0
Nozzl
e
Leaf spring
Nozzle grip piece
w
WARNING
WHEN ATTACHING OR DETACHING A “TYPE A” NOZZLE, ALWAYS MAKE
SURE THAT THE MACHINE IS TURNED OFF OR IN EMERGENCY STOP.
1
-8
EPD8013110
Operation
Chapter 1
1
Part names and functions
Type F nozzles (Flying nozzles)
Heads 2, 4, 6 and 8 of FNC head assemblies have a flying nozzle changer
that performs automatic nozzle change at high speeds. Type F nozzles
(Types 71F, 72F and 73F) are specifically used with this flying nozzle
changer.
Flying nozzle changer (viewed from the gear side)
28102-D8-00
FNC nozzles
23103-D8-00
Type 72F
Type 73F
Type 71F
2
1
3
1 to 3 : Index holder No.
Index holder No.
1
2
3
Standard nozzles
attached to FNC head
Type 71F
Type 72F
Type 73F
1
-9
EPD8013110
Operation
Chapter 1
1
Part names and functions
3. Feeder plate
Tape feeders, bulk feeders and stick feeders (multi-stick feeders) are
installed on the front and rear feeder plates of the machine. These feeders
pneumatically operate by air supplied from the mounter to feed each
component to the pickup position.
The YV180X feeder plate is separated into 4 plates. Two each are installed
on the A-table and B-table sides. Each feeder set position is designated by
a “feeder set number” as shown below.
Feeder plate
23104-D8-00
Feeder drive air outlet
Power supply connector for multi-stick
feeder and dump station
Tape feeder
Feeder plat
e
Feeder set number on standard machine (top view)
23105-D8-00
140
109 108 101
18
9
40
Multi-vision camera
Multi-vision camera
B table
A table