Q170226E01.pdf - 第11页

RH5 SERVICE MANUAL 1.0−2 DA3SEC−81−000−A0 DA3SEC−81−000−A0 Sentence No. 1. INTRODUCTION This chapter includes explanations as follows: N Use of This Manual: Explains how this manual is organized. Be sure to read it befor…

SERVICE MANUAL

RH5

1.0−1

1ダミー(Sectionのレベル1)

1.0ダミー(Sectionのレベル2)

RH5

SERVICE MANUAL

1.0−2

DA3SEC−81−000−A0

Sentence No.

1. INTRODUCTION

This chapter includes explanations as follows:

N Use of This Manual:

Explains how this manual is organized. Be sure to read it before using this

manual.

N Safety Precautions:

Provides precautions to be considered and practiced when operating or

servicing the RH5. Always read this section before attempting to service the

equipment.

N List of Special Jigs and Tools:

Illustrates special jigs and tools required for servicing the RH5.

Refer to this list for preparing service tools.

N List of Recommended Lubricants:

Summarizes the recommended lubricants for servicing the RH5.

1.1 Use of This Manual

SERVICE MANUAL

RH5

1.1−1

DA3SEC−81−010−B0

1.1 Use of This Manual

DA3SEC−81−010−B0

Sentence No.

1.1.1 Concerning Secrecy

N This manual contains information which, if leaked to outside parties, might cause harm to business of

Panasonic Factory Solution and/or seriously affect safety conditions.

N For that reason, we would ask you strictly not to distribute any information in this manual to customers.

1.1.2 Handling of This Manual

N This manual is prepared only for service engineers in charge of products of Panasonic Factory Solution

at branch offices.

N This manual is based on standard machine specifications. Therefore, it is recommended to refer to its

operating instructions, parts list, writing diagram of control system.

N More technical information and service hints will be added when necessary.

N Some drawings or illustrations are subject to change due to the change of specifications, etc.

1.1.3 Control Numbers

N Control numbers are put to this Service Manual section by section.

Control Number Explanation

Record of revisions due to

change of design.

Record of revisions on the level of corrections

of text or spelling

Section number

Chapter number

Revisions history

These codes are updated when the

manual is revised.

Example:

Stands for document. Fixed at D. Indicated to distinguish

the manual from drawings or diagrams.

Document type

M: Service Manual

Model number

Language:

J: Japanese E: English

Identifies the relevant regulations of the destination of the equipment.

C (Common to all regions), E (EU), P (Regions other than Japan and

EU nations)